Mounting sonar to atv

So this has probably already been asked but, here it goes again what is the go to product to mount a sonar unit to my atv. I want something thats is rock solid. Iam afraid to ram mounts will move when i go over bumps.

Check out Cisco mounts or trax tech mounts.

I used a ram for my Helix 5 on my sled and it doesn’t budge.
DT

The 1.5 inch ball on the Ram Mount with the short arm is what I went to with my HDS 5, it’s rock solid. They make a 1.5 handle bar ball mount. Stay away from the 1 inch they won’t hold anything bigger than a handheld.

Use the right size ram and don’t worry about it.

I tried the RAM mount and it just wasn’t as stable as I would like, the thing vibrated horribly. And with the removable windshield on my machine there just wasn’t a good spot to mount the unit that was easy to view and access.

I was looking around my machine and found the most perfect spot. The handlebar mount! I wrangled up a couple pieces of 1/8×3/4 aluminum bar, drilled a few holes, bent it to a slight angle, and done! It’s directly in front of me, easy to access, rock solid, and protected from branches or whatever that may hit it. Best of all it was FREE!

Attachments:

1. 

   IMG_2610.jpg
   

2. 

   IMG_2609.jpg
   

Thanks all I will check all that stuff out

I use ram mount for Elite 5.. have had no issues

One option is to get the Rhino (Otter) Extended front ATV box. You can then put any electronics on a Genz Blue Box and just strap it down. There for it’s easily removable and you won’t need an extra flasher.

Attachments:

1. 

   14963395_10154645261948396_4550189407929682644_n.jpg
   

Ram mount on the handle bar, 1 1/2″ ball

I installed the RAM ball on my Grizzly’s front rack so it’s close to the cig adapter for the powercord…

Attachments:

1. 

   test-1.jpg
   

JoeMX what year grizz ya got, wondering if it hits handle bars when turning. I have a 16 kodiak

Painted a piece of maple and bolted it on the Griz rack then attached the bracket. Its close to the cig adaptor and works great.

Attachments:

1. 

   ATV-Bird-mount.jpg
   

Here’s another pic.

Attachments:

1. 

   atv-molunt.jpg
   

Justin Radel wrote:

JoeMX what year grizz ya got, wondering if it hits handle bars when turning. I have a 16 kodiak

2016 SE, no chance it will interfere…

Nice ride and thanks i will give that a try.