Minn kota vantage

  • Josh Hugel
    Posts: 27
    October 11, 2021 at 8:21 pm #2066748

    Hey guys,

    I bought a minn kota vantage this year, I had to built a custom bracket to fit my boat (pics attached). I have to use the tilt feature to clear my trim tab but it doesn’t seem to want to hold and often times it slides down. Is there any better way to secure it in the position you want?

    Attachments:

    1. EDAC04C6-DF3A-4D7B-8615-F976E6BC2203.jpeg

    Craig Sery
    Bloomington, MN
    Posts: 1204
    October 11, 2021 at 8:40 pm #2066752

    Bellevue or a lock washer?

    Hot Runr Guy
    West Chicago, IL
    Posts: 1933
    October 11, 2021 at 8:51 pm #2066758

    Can you add a bolt & washer to act as a stop in the forward part of the slot?

    HRG

    Attachments:

    1. EDAC04C6-DF3A-4D7B-8615-F976E6BC2203-2.jpeg

    2. EDAC04C6-DF3A-4D7B-8615-F976E6BC2203-1.jpeg

    Josh Hugel
    Posts: 27
    October 12, 2021 at 3:02 pm #2066935

    I really like this idea.. thanks I’ll try and let you guys know!

    Josh Hugel
    Posts: 27
    April 23, 2022 at 7:41 pm #2118630

    Seemed to work good, thanks!!

    Attachments:

    1. image-2-scaled.jpg

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.