Marcum questions

  • gregory
    Red wing,mn
    Posts: 1628
    #1590980

    So I have a marcum lx-1 I’ve used for a long time and it has work well for no troubles at all, last year went up north fished 20+ fow for crappie and I’m unable to see my jig, power turned up same thing , new battery same thing, so I’m gonna buy a new one. So my question is will a lx-3 do the trick or does a guy need to get into a lx-5? Or does the new marcum vx-1 do the trick, the deepest I fish is 30′ most of the time 25′ or less. Not a vexilar marcum debate just looking for advice on these units, my marcum has served me well for 10 years so not looking to switch brands!

    Dusty Gesinger
    Minnetrista, Minnesota
    Posts: 2417
    #1590984

    Could it be your transducer?

    gregory
    Red wing,mn
    Posts: 1628
    #1590994

    I am gonna try a new one, so one should be able to see jig in 20+ fow?

    CBMN
    North Metro
    Posts: 968
    #1590996

    I had the same thing happen to an old zercom colorpoint after about 12-15 years.

    I went to an hbird ice 45 and now an lx9. I would get the unit you can best afford.

    ponyexpress
    Posts: 45
    #1591034

    It could definitely be the transducer. I had a buddy that borrowed an fl8 last year and had a hard time seeing his lure at all. We swapped my the transducer from my fl18 to the fl8 and it worked great. We ended up running back into town and got a new transducer and fished the rest of the day.

    Kent thompson
    Foreston mn
    Posts: 328
    #1591041

    So I have a marcum lx-1 I’ve used for a long time and it has work well for no troubles at all, last year went up north fished 20+ fow for crappie and I’m unable to see my jig, power turned up same thing , new battery same thing, so I’m gonna buy a new one. So my question is will a lx-3 do the trick or does a guy need to get into a lx-5? Or does the new marcum vx-1 do the trick, the deepest I fish is 30′ most of the time 25′ or less. Not a vexilar marcum debate just looking for advice on these units, my marcum has served me well for 10 years so not looking to switch brands!

    were you able to see your jig in over 20′ for the ten years you owned it? I would sure hope so I’m pretty confident you’ve developed a bum ducer and a quick call to marcums customers service would have you going in the right direction.

    gregory
    Red wing,mn
    Posts: 1628
    #1591049

    I have only fished deeper water with a small jig a few times to tell you the truth! Fish shallow water most of the time.

    Kent thompson
    Foreston mn
    Posts: 328
    #1591076

    Gregory-the 1 is the only marcum I’ve never owned. but I would think you wouldn’t/shouldn’t have any issue seeing that jig in 60′ depth’s,hopefully someone that owns one will chime in here eventually. but like I said before a simple call to marcum’s customer service can have you back on the right track catching fish with this unit again.

    Eelpoutguy
    Farmington, Outing
    Posts: 10440
    #1591134

    I have the LX6, it happens every once and a while. Sometimes I turn the Sensitivity level up. I also wiped the bottom of ducer off and it worked great, even though I didn’t detect any foreign matter on it.

    ______________
    Inactive
    MN - 55082
    Posts: 1644
    #1591144

    The transducer is the most important component of the modern fishing experience.

    I’m kind of a geek this way, but I always carry spares and regularly switch ducers. I even have spare transducers coiled away and sealed in my boat.

    Phil Pickering
    Janesville, WI
    Posts: 20
    #1591309

    I have used my vx-1 for the past five years without a problem. I finally upgraded to an lx-5 only because I’m doing more perch fishing in 60’+ fow and the vx-1 is terrible over 60′. You have to turn the gain up to 8-9 to find your jig but then it’s just a big red blob near bottom with no target separation. That being said, if you only plan to fish 30′ and under, the vx-1 will work great for you. I’ve never had a problem and routinely out fish my buddy with his fl-22.

    gregory
    Red wing,mn
    Posts: 1628
    #1591740

    Picked up a new transducer and just like new again, and I picked up a new lx-5I just in case and didn’t work out.put it to work today and both units worked flawless.

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.