Seat pedestal

  • Jami Ritter
    Hastings, MN
    Posts: 3067
    March 23, 2010 at 2:43 pm #1307354

    Hopefully someone knows this answer, cause I don’t…

    I’m looking to buy a quick stow rod rack, to keep rods off the floor and from getting broken as often…

    Like the one seen here rod rack

    Problem is that I don’t know which seat pedestal i have in an 04 Lund pro v.

    My options are

    2.375 mount
    3/4 thrd pin mount NO
    wedge mount NO
    1.75 mount

    I’m going to guess its the 2.375 mount?

    Anyone know for sure?

    Thanks,

    Jami

    Jon Stevens
    Northfield, Wi
    Posts: 1242
    March 23, 2010 at 2:55 pm #856441

    If you have the book handy, there is pictures of all the different styles. I just seen it this morning.

    trumar
    Rochester, Mn
    Posts: 5967
    March 23, 2010 at 2:56 pm #856443

    can you post a pic of your seat mount ? that may help us help you.

    Jami Ritter
    Hastings, MN
    Posts: 3067
    March 23, 2010 at 3:03 pm #856448

    Good idea jigger! i do happen to have all the catalogs at my desk. And from the looks of it, its the plug in post so its gotta be the 2.375 mount

    Thanks all!

    Jami

    wilk71
    Albany, Missouri
    Posts: 74
    March 23, 2010 at 3:19 pm #856453

    Most Lunds that I have been in including my Mr. Pike have the wedge style pedestal. I have that very rack in my boat and love it!

    Brian

    perch_44
    One step ahead of the Warden.
    Posts: 1589
    March 23, 2010 at 3:40 pm #856462

    Quote:

    I’m looking to buy a quick stow rod rack, to keep rods off the floor and from getting broken as often…

    maybe you just need to have less of these?

    Czech
    Cottage Grove, MN
    Posts: 1574
    March 23, 2010 at 4:33 pm #856473

    Hey, do you guys know if that rack would interfere with a trimmed up motor if used in the back hole?

    burbob
    Hastings,MN
    Posts: 364
    March 23, 2010 at 4:49 pm #856478

    Quote:

    maybe you just need to have less of these?


    Not an option

    hookem_9
    Hastings, MN
    Posts: 320
    March 23, 2010 at 5:34 pm #856498

    I only had a 05 Lund brochure at the desk to reference, but it looks like the 2.375 base like this…

    perch_44
    One step ahead of the Warden.
    Posts: 1589
    March 23, 2010 at 6:38 pm #856523

    Quote:

    Quote:

    maybe you just need to have less of these?


    Not an option

    or maybe more? so you’re not up walking around then…

    sauger
    Hastings ,MN
    Posts: 2442
    March 23, 2010 at 6:50 pm #856525

    Quote:

    Quote:

    Quote:

    maybe you just need to have less of these?


    Not an option

    or maybe more? so you’re not up walking around then…

    Ya! Just lay em on the floor next to me

    sauger
    Hastings ,MN
    Posts: 2442
    March 23, 2010 at 6:54 pm #856526

    I’m giving a tape measure reading seminar tonight after work. Maybe you should attend

    Are you going to mount that up front in place of your butt seat?? The front base may be different. I think it is on my boat.

    Jami Ritter
    Hastings, MN
    Posts: 3067
    March 24, 2010 at 12:46 pm #856740

    Nope, all my bases are the same, so are yours….. i didn’t have the base in front of me you ding dong.

    Bring the tape tonight, i’ve got a sauger project…

    smackem
    Iowa Marshall Co
    Posts: 956
    March 24, 2010 at 2:28 pm #856770

    I checked out my boat with a 150 EFI and it would be hitting the rods

    Mike Klein
    Hastings, MN
    Posts: 1026
    March 28, 2010 at 1:22 am #857911

    i made one of those with pvc I looks exactly like the cabelas for a buch less. very durable I just never use it

Viewing 15 posts - 1 through 15 (of 15 total)

You must be logged in to reply to this topic.