Lund master power/fuses

  • fisherman-j
    Northern MN
    Posts: 323
    April 26, 2013 at 1:46 pm #1307477

    Question for you. ’05 Pro-V. When I turn on the master power switch and turn on the stereo, but pull the fuse, the stereo stays on. Same as the horn – pull the fuse but the horn still works. Is this supposed to be this way or is something not right? If so, why do they set it up this way? If not, where do I start? Thanks!

    briansmude
    Posts: 184
    April 26, 2013 at 2:19 pm #1166065

    My guess is the fuses are labeled wrong, if not something is wrong.

    John Gildersleeve
    Frazee,MN
    Posts: 742
    April 26, 2013 at 11:30 pm #1166159

    They should be hooked up to the main fuse block. If you turn the master power switch off and they dont work they are hooked up correctly. If they still work with the master power switch turned off the wiring has been played around with.

    Adley
    Posts: 33
    June 28, 2013 at 6:58 am #1180701

    Re-install the fuses, it will work.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.