Lowrance 111

  • robstenger
    Northern Twin Cities, MN
    Posts: 11374
    October 13, 2009 at 9:41 pm #1306530

    My back light on my Lowrance 111 screen does not always work????? Any idea on what it might be or a fix? Would a soft reset be in order? If so how do you do that again?

    dandorn
    M.I.N.N.E.S.O.T.A.
    Posts: 3207
    October 13, 2009 at 10:35 pm #808986

    Hey Rob,

    A reset is worth a try.

    1. Turn unit OFF
    2. Press and hold the PAGES key
    3. Press and hold the PWR key
    4. Release both buttons when the USA map
    appears

    Let us know if it helped.

    bigcrappie
    Blaine
    Posts: 4330
    October 14, 2009 at 1:41 am #809009

    Or, You could let me use it for a while I need a nice locator.

    bbaune
    Posts: 52
    October 14, 2009 at 1:47 am #809010

    I am having similar problems with backlights on my lowrance graphs. turns out there is something messed up with the networking. When i turn on the front graph it is dim, when i try to make it bright it dims the back graph. when i try to make them both bright one of them always goes dim. not sure if that is any help, but if anybody knows of a fix for that i’d be a very happy guy!

    B

    dandorn
    M.I.N.N.E.S.O.T.A.
    Posts: 3207
    October 14, 2009 at 2:20 am #809014

    Quote:

    I am having similar problems with backlights on my lowrance graphs. turns out there is something messed up with the networking. When i turn on the front graph it is dim, when i try to make it bright it dims the back graph. when i try to make them both bright one of them always goes dim. not sure if that is any help, but if anybody knows of a fix for that i’d be a very happy guy!

    B

    Backlight Synchronization

    The Backlight Synchronization command will keep all display unit
    backlight levels consistent across the NMEA 2000 network. So, if you
    set the backlight level to 75% on one display unit, all other units on the
    network will automatically switch to the same setting.

    To turn on/off Backlight Synchronization:

    1. Press MENU|MENU, select NMEA 2000 and press ENT.
    2. Highlight BACKLIGHT SYNCHRONIZATION and press ENT, which will turn
    on/off Backlight Synchronization.
    3. Press EXIT repeatedly to get back to the main display.

    bbaune
    Posts: 52
    October 14, 2009 at 2:35 am #809015

    just when i thought i’d been through every menu!

    thanks for the help, i’ll give that a shot this weekend.

    robstenger
    Northern Twin Cities, MN
    Posts: 11374
    October 14, 2009 at 12:34 pm #809066

    Thanks guys I’ll look into this further hopefully tonight.

    It is just one unit. The other works fine but sometimes it works other times not.

    kooty
    Keymaster
    1 hour 15 mins to the Pond
    Posts: 18101
    October 14, 2009 at 2:57 pm #809113

    Be sure you backup your waypoints prior to doing any resets!!

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.