Connecting Elite4 to Minnkota Univeral Sonar 2?

  • JoeMX1825
    MN
    Posts: 17846
    February 1, 2014 at 3:30 pm #1360185

    I have a Terrova with Universal Sonar 2 and just purchased a Elite 4 Sonar/Mapping unit. The Elite 4 comes with a single combo Transducer/power cord that uses a 6 pin connector to the Elite4. How do I connect the Elite 4 to the Terrova? Do I not use the combo cable that came in the box and just use the Universal Sonar connector from Minnkota? Will the Minnkota cable have power and the transducer lines in 1 cord?

    Previous Lowrance units I’ve owned had separate Power and Transducer cables, not 1 cable that combines both…i’m confused…

    igotone
    Posts: 1746
    February 1, 2014 at 4:24 pm #1385044

    Quote:

    Will the Minnkota cable have power and the transducer lines in 1 cord?

    Yes

    DAN J
    Posts: 127
    February 1, 2014 at 4:28 pm #1385047

    Don’t think you can do that with the Elite 4. There is no power from theTerova transducer and no way to remove the transducer on the 4. You need a unit with a separate power cable and transducer.

    wimwuen
    LaCrosse, WI
    Posts: 1960
    February 1, 2014 at 5:00 pm #1385056

    I have the 67c on mine with the single plug and it works fine. Just get the right connector from minkotta and you’re set

    JoeMX1825
    MN
    Posts: 17846
    February 1, 2014 at 5:16 pm #1385058

    Quote:

    I have the 67c on mine with the single plug and it works fine. Just get the right connector from minkotta and you’re set

    I really appreciate the responses!

    So all I have to do is connect the Minnkota universal sonar cord ( I believe it’s the #9 cord) to the back of the Elite4 or do I plug it into the Lowrance single power/transducer cord and then just shove the transducer and extra cord up under my bow panel?

    wimwuen
    LaCrosse, WI
    Posts: 1960
    February 1, 2014 at 5:56 pm #1385064

    You should just have to plug that us cord directly to your elite 4. That’s how my 67c cord works

    JoeMX1825
    MN
    Posts: 17846
    February 1, 2014 at 6:20 pm #1385070

    Quote:

    You should just have to plug that us cord directly to your elite 4. That’s how my 67c cord works

    So you have no power cable going from your battery to your 67c? Just the single US2 cable going from the trolling motor to the adapter cable to the back of the lowrance? That sounds too good to be true…i would have thought this was a much bigger issue as these smaller units are ideal for bow mounting and utilizing universal sonar yet i can’t find anything about it on the net.

    dandorn
    M.I.N.N.E.S.O.T.A.
    Posts: 3207
    February 2, 2014 at 9:16 am #1385159

    MKR-US2-9

    Eagle

    Cuda 168, Cuda 168EX, Cuda 128, Cuda 240 S/GPS, Cuda 240i S/GPS, Cuda 242, Cuda 250, Cuda 300,

    Cuda 350, FishElite 320, FishElite 480, FishElite 500C, FishElite 520C, FishElite 640, FishElite 642C,

    FishMark 320, FishMark 480, FishMark 500C, FishMark 640C, SeaFinder 240DF, SeaFinder 245DS,

    SeaFinder 250DF, SeaFinder 320DF, SeaFinder 480DF, SeaFinder 500CD, SeaFinder 640C,

    SeaFinder 642C, SeaCharter 320DF, SeaCharter 480DF, SeaCharter 500CDF, FishEasy 2*, FishEasy 245DS,

    FishEasy 250DS, FishEasy 320C, FishEasy 350C

    Lowrance

    X-4, X-4 Pro, X-47, X-47EX, X-50DS, X-67C, X-86DS, X-96, M-52i, M-56, M-56i, M-68C, M-68i,

    Elite-4, Elite-4X, Elite-5, Elite-5X, Mark-4, Mark-5X, Mark-5X PRO

    Source

    JoeMX1825
    MN
    Posts: 17846
    February 2, 2014 at 10:09 am #1385178

    I finally found a picture of the MKR-US2-9 cable, looks like it’s a Y cable with its own power cables, totally different from other Universal Sonar cables. Looks like you don’t use the Lowrance cords at all.. web page

    Thanks to all who replied!

    igotone
    Posts: 1746
    February 7, 2014 at 2:34 am #1386621

    Quote:

    I finally found a picture of the MKR-US2-9 cable, looks like it’s a Y cable with its own power cables, totally different from other Universal Sonar cables. Looks like you don’t use the Lowrance cords at all.. web page

    Thanks to all who replied!

    that’s it — Y cord – power one way – US 2 the other

    I really like my X-67c’s

    Jay Johnson
    Morrison, IL
    Posts: 24
    July 3, 2016 at 8:43 am #1627434

    I just bought a used 2006 Alumacraft Navigator with a 80# Terrova with built in transducer. It also has a Humminbird 383c GPS/Sonar connected to it. But the humminbird unit is a piece of junk. I want to put my Lowrance Elite 5 on the bow and connect it to the transducer on the trolling motor. Minn Kota says to use the MKR-US2-9 adapter cable. But the connector plug in the photo is not the same style that plugs into the back of my Elite 5. My Elite 5 has a black colored push-in connector plug with a twist lock collar. Can someone confirm the MKR-US2-9 is the correct adapter plug? I already called Minn Kota and all they said was to refer to their compatibility chart. Girl on the phone was no help at all.

    Ron
    Victoria, mn
    Posts: 810
    July 3, 2016 at 10:06 pm #1627458

    “I already called Minn Kota and all they said was to refer to their compatibility chart. Girl on the phone was no help at all.”

    Call again. If they blow you off, ask to speak to a supervisor. Be polite, but be persistent.

    Jay Johnson
    Morrison, IL
    Posts: 24
    July 4, 2016 at 11:26 pm #1627513

    After looking at my transducer plug closer I noticed it is a 6 pin plug but it has a locking collar. The MKR-US2-9 has the right plug but no locking collar. I ordered the adapter plug on amazon today. It was $5 off and was an amazon prime item. 2 day free shipping. Should have it by Thursday. It’s already shipped.

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.