hds networking

  • G-raff
    Rochester, MN
    Posts: 154
    September 29, 2013 at 5:15 pm #1307313

    is there way to connect my hds 5 to my x100. I want to be able to see the depth in the back of the boat without having a second transducer. Tia Graff

    bassn7
    Bruce,WI
    Posts: 776
    September 29, 2013 at 6:53 pm #1197455

    does your X100 have the nema 2000 port on the back? or just the 2 normal hook ups,if only 2 I don’t think there is a way to share information.

    Stan

    G-raff
    Rochester, MN
    Posts: 154
    September 30, 2013 at 2:00 am #1197526

    yes it does have the nema 2000

    mike-west
    Amery, WI
    Posts: 1422
    September 30, 2013 at 10:16 am #1197546

    On your X100, Try going into your Sonar menu and under settings, see if you can chose the HDS as a sonar source.
    You will have to be connected via NEMA network for this to have any chance… I beleive.
    Maybe a simple call to Lowrance before hooking up the NEMA though.

    John Schultz
    Inactive
    Portage, WI
    Posts: 3309
    September 30, 2013 at 8:31 pm #1197720

    You can’t share transducers over NMEA2000. That is that just an ethernet option as far as I know.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.