I’m looking for a ram mount that I can put two 5″ lowrance 520’s on. I’ve seen people with them before but can’t seem to find them on rams website. Any help would be great! 
April 30, 2012 at 1:22 am
#1307066
Double ram mount
-
April 30, 2012 at 2:35 am #1063761
Here ya go: I think everything you need is here.
http://www.walleyesinc.com/walleyeinc3/onlinestorelramacc.htm#Standard C-Ball Accessiories 1.5April 30, 2012 at 3:13 am #1063780The ram that I saw had a large plate mounted to one ball. The two units then mounted onto the Plate. I don’t see that there.
April 30, 2012 at 11:53 am #1063808I was thinking of the double ball set-up. I have used that in the past. Not familiar with what you are talking about. Sorry.
April 30, 2012 at 1:20 pm #1063827I will do some checking but do you think the person you saw it with custom made his by adding on more plate?
April 30, 2012 at 1:25 pm #1063830You think this is big enough?
http://www.ram-mount.com/CatalogResults/PartDetails/tabid/63/partid/082065077045068045049049049085045067/Default.aspxThe ones made for a 5″ are 6.25″ base.
April 30, 2012 at 5:59 pm #1063980I have looked at those plates but think they will be to short with the knobs that tighten the unit to the bracket. 13″ is what I née the plate to be
April 30, 2012 at 6:24 pm #1063998Then just get a piece of 1/4″ metal plate 13-14″ or however long you need and attach it to the ram base. Then drill holes to mount your graphs on it.
Viewing 8 posts - 1 through 8 (of 8 total)
You must be logged in to reply to this topic.