Sharing Info between 113C HD and HDS10

  • DaveS
    Posts: 4
    November 16, 2011 at 2:23 am #1306957

    I am currently sharing NMEA2000 from my GPS Module to a 113C HD and HDS10. Is it possible to utilize a LSS1 Structure scan with 3 eithernet ports to share info between a 113C HD and HDS10 ? I know you can run ethernet between two 113C HD units or between two HDS Units. Just trying to understand all sharing option possible between a 113C HD and HDS10.

    dandorn
    M.I.N.N.E.S.O.T.A.
    Posts: 3207
    November 16, 2011 at 2:57 am #1009289

    StructureScan only works with the HDS line.

    mike-west
    Amery, WI
    Posts: 1422
    November 16, 2011 at 10:46 am #1009319

    I do beleive if you ethernet the HDS 10 & 113 together, and chose your sonar choice on the 113 as HDS 10 that you’ll receive sonar on the 113 in HD or broadband.

    John Schultz
    Inactive
    Portage, WI
    Posts: 3309
    November 16, 2011 at 1:02 pm #1009340

    You won’t be able to get any of the LSS-1 information, but you will be able to share anything that can be shared via ethernet, like transducer feeds. The LSS-1 will just function as an ethernet hub for the 113.

    DaveS
    Posts: 4
    November 17, 2011 at 2:04 am #1009685

    Thanks Guys, I appreciate it. I called Lowrance Customer Service today and they confirmed that hooking Ethernet from the LSS1 Structure Scan to the LCX 113C HD units will allow me to share the 2D sonar signal being sent to the HDS10. I will not be able to see the Structure Scan on the LCX 113C HD which is understandable but will at least have the ability to see the 2D Sonar info on the two LCX 113C HD’s. Picked up a couple ethernet cables today so going to pull a couple more cables and give it a try.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.