Lowrance elite ti2 question

Ok guys I am interested in purchasing new lowrance graphs but I have some questions. I will be buying the elite ti2 9” and 7” I want to have side down and sonar imaging so I am perchasing them with the 3in1 transducer. My question- If I want to link them together what will I need? I will run the console unit off a ducer on the transom and the bow one from a minnkota terrova trolling motor. What cords will I need to link the 2 units as well as connect the bow unit into my built in minnkota transducer? Thanks!

Carter,

You don’t need anything in terms or wires or cables to share the 2D sonar and mapping, as well as waypoints, trails, etc… Those are all shared wirelessly.

One thing you need to know up front, is that the Elite TI2 units are NOT capable of sharing DI/SI between units. You would only be able to view the SI/DI on the console unit connected to the 3in1.

You’ll need an adapter cable to convert the transducer from the Terrova to connect to the Lowrance.

Waxy

Carter, Waxy nailed it. I have an Elite Ti2 9 and will be adding a 7 to do much the same thing via wireless. In case you didn’t know, there is also an app for phones/tablets that will let you mirror the screen as well. I use it sometimes when at the stern of the boat, giving me a 3rd screen.