Lowrance Elite-4x CHIRP IceMachine Portable Fishfinder

  • WinnebagoViking
    Inactive
    Posts: 420
    #1493142

    Getting frustrated. Retailers don’t know when it will be available. Lowrance won’t answer my email. Anybody have a number for Lowrance?

    skeeter20
    Winnie/Grand Rapids,MN
    Posts: 902
    #1493653

    Here try giving them a call. 1-800-628-4487. In the mean time I will try finding out as well.

    WinnebagoViking
    Inactive
    Posts: 420
    #1493659

    Thx Corey. I’ll try to find some time to call this afternoon. As an ‘insider’ you may have better luck than me, though. I appreciate it. WV

    WinnebagoViking
    Inactive
    Posts: 420
    #1494241

    Several retailers have finally been able to estimate a Feb 7 ship date.

    Could not get an answer from Lowrance, however — they won’t respond to emails, don’t answer questions on social media, and the customer service rep didn’t know how to locate that info. While I like the product, that lack of effort to connect with the customer trying to make a purchase sure makes me gun shy about the brand. How bad will it be if I need service or support? I could fish for a few weeks without sonar but may end up going with another brand after this experience.

    WinnebagoViking
    Inactive
    Posts: 420
    #1494842

    Finally some satisfaction. I was able to purchase the Lowrance Elite4x Chirp 83/200khz and the Lowrance Ppp-18i Elite/Mark Icefish Bag W/Transducer separately plus shipping for less than the MSRP. Should be in business by Wednesday.

    Ralph Wiggum
    Maple Grove, MN
    Posts: 11764
    #1494847

    Sweet. Let us know how you like it, and share some photos of it in action. I sent my X67c along with my boat when I sold it, but I loved that thing on the ice and the open water.

    WinnebagoViking
    Inactive
    Posts: 420
    #1494854

    will do Ralph. I too loved my x67c. Looking forward to the bigger screen and CHIRP processing on the 4x– supposedly much better target separation.

    hamms
    Mn
    Posts: 493
    #1499404

    How have you liked this unit??

    WinnebagoViking
    Inactive
    Posts: 420
    #1499548

    How have you liked this unit??

    I got to use it for the 1st time yesterday and the 2nd today. So far so good. Set up is a breeze. Far more sensitive than my x67c which will be great over deep water. I wish I could have found some more fish to get a good work out.

    A few negatives. The scroll is less than smooth but it’s not that big of a deal. The mounting bracket is a POS — still working out how to keep the unit firmly in place while bouncing around.

    hamms
    Mn
    Posts: 493
    #1499711

    Good report! I am so on board with the products coming from Lowrance. I just hope they can make some improvements to their ice ducers. Dual beam would be great. Humminbird has this already… anyway post again after you wack some fish and put it to the test. How do you like the screen size? It looks about right to me.

    WinnebagoViking
    Inactive
    Posts: 420
    #1499802

    Screen size is nice. Fishing 17′ of water in 4X zoom, I had a very clear view of the bottom 5′ — perfect. The one negative about the view is the battery level display is in a really awkward position in the lower left corner but up 3/4″. There must be a way to hide the battery display overlay but I haven’t figured it out yet.

    hamms
    Mn
    Posts: 493
    #1500136

    Ive noticed that too. Im sure it can be moved.

    rayc
    ontario, canada, sault ste. marie
    Posts: 52
    #1500158

    winn, take it out of ice mode (in general mode) and the big green battery will be gone?? at least it goes away on my elite 5 chirp?

    WinnebagoViking
    Inactive
    Posts: 420
    #1500164

    winn, take it out of ice mode (in general mode) and the big green battery will be gone?? at least it goes away on my elite 5 chirp?

    thx for tip. i’ll give that a try.

    WinnebagoViking
    Inactive
    Posts: 420
    #1504011

    Used the new unit for some deep water laker fishing today (120′-140′). Took quite a bit of playing around with settings to get it dialed in but it performed very, very well. I had to turn the CHIRP off and used the “Custom High” setting to get a good clear screen. The depth display in the upper corner bounced all over up to 2x the actual depth but that did not affect the actual image on screen in any way, just kind of annoying.

    CBMN
    North Metro
    Posts: 968
    #1504033

    The mounting bracket is a POS — still working out how to keep the unit firmly in place while bouncing around.
    [/quote]

    If you case is what I think it is I have the same one on my elite 4 hdi and I have been thinking about zip tying the top plate down to the post on each side thru one of the 3 holes on top of each side. If that works as a temporary fix I have been thinking about putting a bolt thru each side, to replace the zip ties, as a more permanent solution. I could sure take some pics if that would helps. I have also thought of just removing the tray and tackle box’s and mounting the unit base right to the bottom of the plastic carrier. Figure I will try the zip ties for an outing or two first.

    ScowardNJ
    Posts: 1
    #1511071

    The mounting bracket is a POS — still working out how to keep the unit firmly in place while bouncing around.

    I thought the same thing until I found this video.

    Peter K
    Posts: 4
    #1513401

    yea the first time you get the unit the quick release thing is stuck. Dont be afraid to move it HARD to get it to slide the first time.

Viewing 19 posts - 1 through 19 (of 19 total)

You must be logged in to reply to this topic.