Looking for a MKR-US-9 Cable

  • Nick Matti
    Posts: 101
    #1580830

    Wondering if anyone would have a lead on where to get a “discontinued” cable for my older Minnkota trolling motor. Specifically I need the MKR-US-9 cable.

    Thanks

    Chuck Melcher
    SE Wisconsin, Racine County
    Posts: 1966
    #1580844

    I wanted to see what it was to know if I had one for ya… googled it, and they are on e-bay. At lest it looks like one or two are left.

    Nick Matti
    Posts: 101
    #1580863

    Chuck-

    I’ve looked twice on ebay. I know some of the other mkr-us cables are on there, but I haven’t found a mkr-us-9.

    trumar
    Rochester, Mn
    Posts: 5967
    #1580873

    This one ? Northland marine 1-715-546-2333

    Minn Kota Adapter: MKR-US-9 $19.95
    Cuda 128, Cuda 168, Cuda 168EX, FishEasy 2 -manufactured after 2002, FishEasy 2T -manufactured after 2002,
    FishElite 320, FishMark 320, SeaFinder 24ODF, SeaFinder 320DF

    Nick Matti
    Posts: 101
    #1581081

    Thanks Trumar,

    I just got off the phone with them, but unfortunately they are out…

    …hopefully someone has one laying around.

    Chuck Melcher
    SE Wisconsin, Racine County
    Posts: 1966
    #1581092

    What is it actually for… is it just the cable to the trolling motor? What Lowrance unit? Photos I saw came up with looked like a set of cables to my old Lowrance, all the GPS puck cables and such.

    That cable Trumar pointed out had the same exact number as the one I saw on e-bay, just a single black cable. The one I think you want.

    wrong image, but correct description
    http://www.ebay.com/itm/Minn-Kota-MKR-US2-9-Lowrance-Eagle-6-Pin-Adapter-Cable-/271999380333?hash=item3f546d2b6d

    They show in stock here as well:
    http://www.trollingmotors.net/lowrance-eagle-sonar-cable-6-pin

    Stupid price… but
    http://www.gandermountain.com/modperl/product/details.cgi?pdesc=Minn-Kota-MKR-US2-9-Lowrance/Eagle-6-Pin-Adapter-Cable&i=91205

    Chuck Melcher
    SE Wisconsin, Racine County
    Posts: 1966
    #1581093

    I think I have one with the right 6 pin adapter on one side, but it has a three wire plug on the other side.

    Nick Matti
    Posts: 101
    #1581141

    Unfortunately, all of those are for US2 sonar.

    The motor I bought is an older unit and takes the original US sonar.

    To the best of my knowledge, although I need the 6pin connector is correct for my sonar, the US2 connector will not hook to my trolling motor.

    Thanks again for looking.

    john23
    St. Paul, MN
    Posts: 2582
    #1581239

    Hi, Nick. I have these cables for a humminbird and for a vexilar, but I don’t have one for lowrance anymore. Let me know if you want the other two and I’ll mail them to you.

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.