Lite Flite Clam Plate adapter

Picked up a 6 inch Lite Flite for $149.00 at Joes. It needs an adapter to fit the Clam Plate. I found that my K-Drill/clam Plate bolts right up. Had to shim with 1 wrap of electrical tape to get a snug fit. It measures 45 inches from bottom of Clam Plate with the adapter. I didn’t notice that much weight difference from the Mora or K- Drill but now I have the center point and won’t need an extension.

Attachments:

1. 

   D3188A65-7C9D-4549-99BA-E2A662EC10A0.jpeg
   

2. 

   FD2B3AD2-DCFB-4290-BF28-2E55479A1E36.jpeg
   

I did the same thing K drill adaptor works great never thought of the electrical tape mine felt good and snug. It is slightly heavier than the pistol bit but this one has the center point I do want to try mine with just the drill to see how it goes 5# less would be nice.

I really like the Clam Plate, I’m 70 with a pacemaker so it’s kind of a no brained for me. As for the 5 pounds, the plate is worth it’s weight.

Where do you get the adapter? I am looking to do the same setup with the clam plate and the Lite Flite. Is that adapter something scheels would sell or another retail store? I am going to start with just my machine and the lite flite and see how it goes.

I got mine at Scheels it is made by Clam about 15 bucks if memory serves me

It’s the Clam Plate/K-Drill adapter. You should be able to find it just about anywhere that sells K-Drills or Clam Plates. As mrpike said about $15.00.

I think this is going to be a great setup.

I think this is a awesome set up Crappy Fisherman! Thanks for sharing now we just need to add ice

Thanks I am going to pick one up and switch over to the drill for early ice for sure. Then as winter rolls on will decide on if I take the gas motor out or not.