Thought I’d share how I am securing and transporting my K-dill on my ATV.
I started with a piece of plywood cut to fit the front rack. Then added some 2×4’s to block in the auger and drill. The auger rests on the plywood and the drill rest on a piece of 2×6. The 1 1/2 difference fit perfectly with the difference of the drill body to the auger diameter (6″ K-drill). Bulk bungee cord in two places holds the drill and auger down tight, no bouncing and it is quick release.
February 14, 2018 at 7:38 pm
#1752496