K-Drill

  • slabz
    Posts: 103
    October 22, 2017 at 8:08 pm #1722415

    Hey guys, I was just wondering if anybody has any experience with the K-Drill attached to a powerhead? I have a 10″ Strikemaster Lazer that is about 6-7 years old and runs well but I have not had any luck with the blades staying sharp. I would be interested in attaching the K-Drill to it. What are everyones thoughts? Thanks!

    Beast Fisher
    Posts: 21
    October 24, 2017 at 11:43 am #1722814

    i got a 1/2″ makita (high torque cordless) drill and a NILSUSA CORDLESS CONVERTIBLE AUGER from fleet farm, the kdrill is very similar but made out of plastic and lighter weight, slightly less efficient at drilling than the NILS

    i used it all last winter it worked great.. honestly the best ice fishing investment you can make is going electric for ice augers.

    http://www.nilsmaster.com/website2016_010.htm

    mrpike1973
    Posts: 1507
    October 24, 2017 at 12:12 pm #1722827

    I had a Eskimo mako that i put the K Drill on it works but very slow. The revolutions are to slow hence why it works on a drill better just me experience.

    Evan Pheneger
    Hastings, MN
    Posts: 838
    October 24, 2017 at 12:21 pm #1722830

    I have messed with the k-drill on a strikemaster power head. Too slow. It is a few pounds lighter as a complete set up but it takes twice as long to drill holes.

    You need the higher rpms from a drill for the k-drill.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.