Jog Feature, Terrova Ilink BT

  • Francis K
    Champlin, MN
    Posts: 830
    March 20, 2019 at 10:36 am #1844592

    Hopefully someone can help me with the jog feature that I’m struggling with…

    As I understand once the motor is on anchor mode, to jog 5′ in any direction I press left/right or forward/backward button to move in increments of 5′ for each time I push the button. When I do this the motor stops and I begin to drift.

    Am I missing a step?

    CBMN
    North Metro
    Posts: 974
    March 20, 2019 at 10:54 am #1844603

    Francis,

    I have a 55lb ILink BT on my 16′ river boat and it works just as it should so I am not much help. I was moving around a wing dam on Sunday with is and moved up, and down stream, and in and out from the shore but just using the 4 directional buttons.

    Dave maze
    Isanti
    Posts: 998
    March 20, 2019 at 12:30 pm #1844649

    Did you pair the motor to the position sensor? If not you just ended spot lock. There should be arrows on the screen when you are in spot lock mode of you have a paired position sensor.

    Red Eye
    Posts: 963
    March 20, 2019 at 12:45 pm #1844658

    Have to pair it and calibrate it. Owners manual has step by step which includes doing 3 tight circles with your boat.

    Francis K
    Champlin, MN
    Posts: 830
    March 20, 2019 at 12:48 pm #1844663

    Yep, I suspect this is the problem now that you guys mention it.

    Thanks!

    Dean Marshall
    Chippewa Falls WI /Ramsey MN
    Posts: 5854
    March 20, 2019 at 12:52 pm #1844666
    Francis K wrote:

    Yep, I suspect this is the problem now that you guys mention it.

    Thanks!

    It happens to the best of us old timer ! :]

    Denny O
    Central IOWA
    Posts: 5829
    March 20, 2019 at 5:24 pm #1844734

    Francis! roll
    doah

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.