is your Marcum LX-6 gauge cluster text partially cutoff the screen?

  • JoeMX1825
    MN
    Posts: 18377
    January 22, 2019 at 10:23 am #1828412

    When setup to display the gauge cluster on the bottom of the screen, I noticed that the gauge cluster text is partially cutoff from the screen when looking at straight on, the full text display only becomes visible if looking almost directly down on the display from overhead? If fishing over the hole this isn’t an issue, but when sitting, the text gets cut off…

    is this just an LX6 thing or something specific to my LX6? Marcum’s LX6s website images show the same space gap for the gauges that the LX7 has…

    My screenshot picture attached below:

    Attachments:

    1. lx6s.jpg

    Huntindave
    Shell Rock Iowa
    Posts: 3092
    January 22, 2019 at 11:13 am #1828426

    You should be able to adjust the entire head unit to change the viewing angle to suit your needs. I can understand that moving from a sitting position to a standing position, would alter your viewing angle and thus may required a similar change in the screen angle, to obtain full view, if it bothers you.

    JoeMX1825
    MN
    Posts: 18377
    January 22, 2019 at 11:56 am #1828438

    yep, and I figured the LX-6 screen space would be much more limited than the lx-7, but when looking at marcum’s own product images, the LX-6 screenshots with gauges shown on the bottom looked identical to the LX-7 so I was curious if something was off on mine.

    here’s marcum’s website image of a LX-6, you can clearly read the full gauge text:

    Attachments:

    1. lx6ss-1.jpg

    2. lx6ss.jpg

    bken
    Posts: 68
    January 22, 2019 at 12:40 pm #1828455

    Did you try a factory reset and see if that helps

    ozzyky
    On water
    Posts: 817
    January 22, 2019 at 1:02 pm #1828462

    I’ll buy it from ya for say 525 if your not happy….

    Mudshark
    LaCrosse WI
    Posts: 2973
    January 22, 2019 at 2:19 pm #1828482

    My LX6 shows all the gauges full text like they should…..
    Weird…..

    Spicoli
    SESD
    Posts: 5
    January 22, 2019 at 3:05 pm #1828499

    Mine does the same thing, I just live with it.

    Fishtrekker
    Land of 10,000 Lakes
    Posts: 113
    January 23, 2019 at 7:08 am #1828643

    Mine does the same thing as well,sounds like that is normal based on the above comments. Never bothered me. I never use the gauge display either as it takes up space on my screen.

    JoeMX1825
    MN
    Posts: 18377
    February 7, 2019 at 10:55 am #1833259

    Can other LX-6 owners post pictures of your screen with the guages displayed? I’m curious if mine is an actual issue or if all LX-6 screens look this way?

    Gofaaast
    Posts: 5
    February 8, 2019 at 5:53 pm #1833755

    Depends on your screen angle. I typically use graph and vertical zoom. My gauges display on the right if I choose to display them which is seldom.

    Attachments:

    1. IMG_6304.jpg

    2. IMG_6303.jpg

    JoeMX1825
    MN
    Posts: 18377
    February 9, 2019 at 9:24 am #1833932

    I appreciate you posting some screenshots, I still might bring it to Marcum to have them inspect it. I’ll report back what they tell me.

    Jeremy olmsted
    Posts: 4
    February 12, 2019 at 4:21 pm #1834809

    I contacted Marcum about this same thing which at first i thought was an issue and they told me this was normal…for what its worth.

    JoeMX1825
    MN
    Posts: 18377
    February 13, 2019 at 7:54 am #1835003

    i’m getting more used to it as on the ice the angle works well

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.