Clam Patch Kits….

  • gregstew
    Red Wing, MN
    Posts: 347
    January 14, 2011 at 2:06 am #1302203

    Long story short, I let some friends use the Clam 6800 last weekend and some holes got put in it. About 1 to 2 inch holes. (About 10 holes or so)
    What’s a good patch kit for them?

    Geerdes
    Brandon, SD 57005
    Posts: 791
    January 14, 2011 at 2:36 am #926138

    clam sells some on their website

    whiskeysour
    4 miles from Pool 9
    Posts: 693
    January 14, 2011 at 3:21 am #926146

    I just fixed a Sno Boat with tape from Tape Brothers. I’ll be using it for the 1st time tomorrow since the repair. They have a large selection of various types and colors.

    https://www.tapebrothers.com

    Big Lund 20
    Cedar Rapids, IA
    Posts: 270
    January 14, 2011 at 3:54 am #926149

    Call clam and they will send you a piece of patching material. Can’t remember the cost, they sent me mine for free with some warranty replacement parts.

    Then you’ll need to get some 3M spray adhesive.

    You’ll be good to go in no time!

    puddlepounder
    Cove Bay Mille Lacs lake MN
    Posts: 1814
    January 14, 2011 at 4:26 am #926154

    bottle of fabric glue and a old pair of levi jeans. i used it on my otter 2 years ago and it is still holding strong. the back pockets work really good where i used them in the corners of the skirt

    broncosguy
    Blaine, MN
    Posts: 2106
    January 14, 2011 at 12:15 pm #926184

    All i did was use iron on patches for jeans from teh fabric store. they come in 2 or 4 packs and just put 1 on each side of the hole and iron them onto them selves and quick easy fix. but make sure to not leave it on the fabric to long. . but seruiously not to bad. just use it like you are ironing a shirt, back and forth. and will stick in a matter of a few minutes. and holds up well to the cold weather.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.