new strikemaster

  • Michelle1969
    Member
    NULL
    Posts: 54
    #1359700

    Just got a lazer pro http://www.idofishing.com/forum/images/icons/cool.gif, after reading the manual it recommends running 40-1. I have a bottle of opti 2 (new this year) can I just use their recommend mix or the 3-2oz that strikemaster says. Thanks for any help as I don’t want to
    mess this up. BTW why cant they (strikemaster) put a free bottle it the box?

    BBKK
    IA
    Posts: 4033
    #1381935

    Use what is recommended by opti. But since its the first tank, I’d mix a tad bit rich.. or just go buy a bottle of strikemaster oil to be on safe side, for the first gal.

    I’m running eskimo oil through my eskimo until the warranty is up. Then its amsoil or opti-2 at their recommendation.

    icenutz
    Aniwa, WI
    Posts: 2540
    #1381969

    Quote:


    Use what is recommended by opti. But since its the first tank, I’d mix a tad bit rich.. or just go buy a bottle of strikemaster oil to be on safe side, for the first gal.

    I’m running eskimo oil through my eskimo until the warranty is up. Then its amsoil or opti-2 at their recommendation.


    X2 I would run at recommended for firat gallon then switch to leaner if you want. I ran 50:1 Amsoil until the warranty expired and then went to roughly 64:1, 2oz to a gallon. Strikemaster I believe recommends 50:1 using synthetic.

    frezerfisher
    Posts: 63
    #1382029

    While it is new use what is recommended,after that use your Amsoil . That is what I did with no problem. I know that 100 to 1 sounds light but this stuff works great. My small engine doctor uses it all the time.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.