Auger leaking gas

  • tripjorgen
    NESD
    Posts: 40
    #1359482

    I have an 85 jiffy mo 30. I’ve had the carb replaced 2 yrs ago. This year I’ve noticed that the exhaust port is wet with gas (not dripping). When I am cutting holes then I notice the auger dripping gas from the exhaust port. I don’t know if it’s normal or what the problem is.

    icenutz
    Aniwa, WI
    Posts: 2534
    #1376315

    Are you sure it is gas and not oil? What mix are you running? It should be 40:1 not 24:1

    tripjorgen
    NESD
    Posts: 40
    #1376409

    I’m not sure now I guess. I mix one of the small jiffy oils with one gallon of gas. That could be my problem.

    Geerdes
    Brandon, SD 57005
    Posts: 791
    #1376527

    3.2 oz oil to gallon of gas is 40:1. 2.6 oz bottle is 50:1 if believe.

    Cp3
    Hammond, WI
    Posts: 314
    #1376540

    Quote:


    3.2 oz oil to gallon of gas is 40:1. 2.6 oz bottle is 50:1 if believe.



    2.6oz bottle to 1 gallon of gas is 50:1 you are correct sir

    oberg8630
    Posts: 10
    #1376820

    could be the float sticking a little as I don’t think that model would have a diaphragm

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.