Strikemaster solo oil

  • toxic11
    Posts: 222
    December 28, 2013 at 5:05 pm #1359407

    So I guess no one carries the strikemaster solo 2 cycle oil in my area and I need one tomorrow. Would you guys recommend using this oil.

    Dave Koonce
    Moderator
    Prairie du Chien Wi.
    Posts: 6946
    December 28, 2013 at 6:42 pm #1374722

    Heck Yes !!

    Mike Klein
    Hastings, MN
    Posts: 1026
    December 28, 2013 at 8:22 pm #1374742

    Any quality tc3 should be fine.

    HowesFishing
    Kalispell, MT
    Posts: 11
    December 29, 2013 at 7:02 am #1374772

    From the Solo manual…

    “use a clean, high quality 2 cycle oil mixed with fuel at a ratio of 40:1…Do NOT use a full synthetic 2 stroke oil”

    you do NOT need to use a TCW-3 oil(although you can)…this is an air cooled engine with different cooling requirements than a water cooled marine engine.

    Just use a good quality 2 cycle oil, not the .99 cent stuff found in a grocery/convenience store and you will be fine.

    Mike Klein
    Hastings, MN
    Posts: 1026
    December 29, 2013 at 8:06 am #1374787

    If you are getting oil at 99 cents buyer beware.

    scott19
    Posts: 13
    December 29, 2013 at 10:22 am #1374833

    Amsoil saber all the way, I run it 100:1 in my 3hp solo!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.