Of these three, which one has the most sensitive tip and which one gets into the back bone faster? I have a Power Noodle but don’t feel it gets into the back bone as fast as I’d like it to. Of those of you that have been able to compare the different brands, what are your thoughts.
I used my Power noodle for the 1st time this last weekend – I thought that the rod gets into the backbone really fast – Most all the Soft spot is in the 1st 4 – 6 ” on a 28″ rod – If either of the other 2 transitions into the backbone sooner – WOW !!!! If anything I’d like it if my power noodle would be slightly slower getting to the backbone. It took a little while to get use to. Prior to this rod all I’ve ever used was cheap noodle rods where there was almost no backbone. I plan to check out one of the noodle rods from TUC – I hope theirs is softer in the tip and transitions slower into the backbone. For the sunfish and crappies I fish I just don’t need that much backbone – i’d like the rod to load a little more back that it does with the Power noodle.
I have not seen the al dente in person so cant help you there.
The TUC is the most sensitive tip and the quickest to backbone compared to the power noodle. On my 30″ it takes about 4.5-5″ to get into the stiff backbone. It does not take much to drive the hook home, just a little flick of the wrist.
I have an Al Dente and love it. I haven’t used the TUC or Power Noodle but feel my rod has excellent back bone combined with the ultra sensitive noodle tip as far as getting into the backbone. I feel mine get’s into it about 1/3rd of the way into the blank but then has the backbone to reel in some Red Lake walleye without looking like a horse shoe. I would recommend the 6″ handle as the 4″ is to small to hang onto and has a hard time hanging onto rod holders. Thorn Bros use to carry the Al Dente you could call there and see if they have both and try them out next to each other if your close to Fridley,MN
the al dente gets into the backbone fastest, then the PN, then the TUC noodle.
The PN was the original, the “Standard” so to speak.
When Dusty designed the Al Dente blank he had the kick point moved up an inch so it transitions into the backbone faster but still gives you the 1mm tip.
When TUC had their blank made they moved the kick point down, this gives a nice subtle change from tip to backbone but doesnt give that super fast transition. at least that was my understanding when I talked to John at the Ice show about them.
Quote:
the al dente gets into the backbone fastest, then the PN, then the TUC noodle.
The PN was the original, the “Standard” so to speak.
When Dusty designed the Al Dente blank he had the kick point moved up an inch so it transitions into the backbone faster but still gives you the 1mm tip.
When TUC had their blank made they moved the kick point down, this gives a nice subtle change from tip to backbone but doesnt give that super fast transition. at least that was my understanding when I talked to John at the Ice show about them.
That is not what I have seen. Here is a good picture
That is about the bend I have seen with the power noodles. With my TUC noodle the tip to backbone is much shorter.
ekruegers appraisal of the backbone placement on these three rods is spot on IMO. I have the Al Dente and a bunch of PowerNoodles and have played with the TUC (tempted to get one to fish with).
From playing with it, the TUC noodle has a more sensitive tip all-together and less backbone overall, so a picture comparison only goes so far. And also, not all PowerNoodles are exactly the same. I have some 8 year old ones I got before they offered supersized PwrNdles that are much softer throughout the rod compared to some of my newer ones.
I’ve owned a 24″ DH Al Dente and 30″ TUC Precision Noodle. Both were standard pre-built models not built custom for me, standard handles and standard guides.
The DH gets to the backbone quicker.
The TUC tip was more sensitive.
The DH backbone is overall stronger.
The standard guides are much better on the TUC.
I liked the standard DH handle better.
The DH was “prettier”, neater wraps and more intricate design by the handle.
Communication was better with TUC.
The DH was $8 cheaper.
Overall I’d be completely happy owning either one of these 2 rods. I tried to explain every difference I could think of.
Alright guys….I’ve been “out of the loop” as far as these new rods go! As it turns out, I might be heading to ND come the middle of Feb and I would like to get a couple of new rods for this trip. I’m looking for 1 rod that will fish the spoons and Raps in deeper water and the 2nd rod to fish the Hali’s and pencil sinkers (I’m picturing a tip that balances like the old swish rods but quick to the backbone). These fast action “quick to the backbone” rods seem like a great way to go as I have always used stiffer type rods with a balanced out flat steel spring bobber. This setup has always worked very well for me but it seems like it’s time for me to get with the program! The main reason I’m coming to you fella’s is that I’m going to be unable to “physically” go shopping for these rods so I have to buy them “sight unseen”! Hopefully y’all can help me out here! I’ve looked at the TUC site and I like their rods but would like to go a tad cheaper, if possible. If not, then I’ll go with em! Any and all help will be greatly appreciated as I haven’t been out to Devil’s Lake in 15yrs or so and I can’t wait to get out there with a couple of new jiggin’ sticks!!! TY
EH14
I dont think a noodle is the right rod for you, although it will probably handle the halis and pencils, it will be a little on the light side. I think you would be better off with a TUC precision ice or maybe even wait until the precision quick-tip comes out since that sounds like it will be exactly what you want.
For the raps, no idea. I don’t fish those bigger baits.
That’s what I came up with at their site but I didn’t see when the quicktip comes out? I wish I could put these rods in my hand before I purchase one or two, but just not possible so it’s all about the research…
Quote:
That’s what I came up with at their site but I didn’t see when the quicktip comes out? I wish I could put these rods in my hand before I purchase one or two, but just not possible so it’s all about the research…
Maybe post where you are at and see if anyone near you has one you can check out.
I have the Quiverstick on my list! Anyone know of which type/brand of rods the fella’s were using in the ND video fishing the sloughs?
Thanks for all the great responses. For those of you that have played with the DH Custom Al Dentes. Does the tip seem to be as sensitive as the Power noodle and Precision noodle?
Its the same 1mm tip as the powernoodle. im not sure what the diameter of the precision is.
I think that the al dente is more sensitive than the PN for sure. but cant compare it to the precision
I’ve owned the power noodle and currently own a precision noodle. I can for sure say that the precision is the more sensitive of the two. As far as getting into the backbone quicker? I think they are about the same with a slight nod to the precision. You can’t go wrong with any of these two. Both noodle rods are quality built rods.
You must be logged in to reply to this topic.
