TB Tripwire…

  • Sandbags
    SE Wisconsin
    Posts: 42
    #1304070

    Anybody use either of the tripwire indicators with 5mm fiskas? Looking to have a rod custom made with one of the tripwire indicators but I am unsure which model (Light or ML). I will be using 4mm and 5mm fiskas. Is the 5mm too heavy for the Light model? 4mm too light for the ML model? Any feedback would be appreciated. Thanks.

    shaley
    Milford IA
    Posts: 2178
    #1114261

    Not sure what one I have, it’s the one that was out first since I have one of the first and works fine for 3-5mm…

    Eyecatcher01
    Posts: 9
    #1114302

    Here are some pics that might help

    last years version with 2″ ml



    5mm



    4mm

    this years version ml now with 3″ wire



    5mm



    4mm

    Lonnie said they now use different gauge wire where I think last year they just changed the length. I like last years version for smaller nontungsten jigs and the new version should work great 5mm or similar weight jigs.

    Sandbags
    SE Wisconsin
    Posts: 42
    #1114447

    Thanks for the reply and pics! Looks like the ML is the way to go.

    Eyecatcher01
    Posts: 9
    #1114479

    Quote:


    Thanks for the reply and pics! Looks like the ML is the way to go.



    the trip wire I got last year is on panfish sweetheart and this year I put one on a quiverstick and the other on a panfish sweetheart 36″ for hole hopping. So I guess you have another decision as far as what blank to go with. The quiverstick is a little lighter than the panny. Also I would compare the new 3″ ml wire very similar to the first few inches of a power noodle.

    SkiSoloII
    Posts: 2
    #1114494

    I was there ordering rods yesterday. Lonnie said his rule of thumb was 5mm and below light, 6mm ML. I ordered an adjustable ML.

    Dave

    Sandbags
    SE Wisconsin
    Posts: 42
    #1114515

    Quote:


    I was there ordering rods yesterday. Lonnie said his rule of thumb was 5mm and below light, 6mm ML. I ordered an adjustable ML.

    Dave


    Interesting. I got an email back from Lonnie yesterday saying that I should go with the ML wire for 4mm/5mm. I was looking at putting it on a 28″ or 30″ panfish sweetheart. Thanks again guys. On a side note whats guides are people going with? Im looking at going with the standard REC recoils.

    Eyecatcher01
    Posts: 9
    #1114557

    I went with the black recoils…they look nice on the black blank

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic.