Need some help from you ice heads out there

  • Steve Plantz
    SE MN
    Posts: 12241
    November 24, 2011 at 1:01 am #1302915

    I would like to get some accessories for my Otter sled, a hitch & a cover but I am not 100% sure which one I have, they may not make this one any more but I am not sure. The dimensions are about 60″ L X 29″ W X 13″ H.

    Here are the different Otter sleds in the pro line, looks like mine is close to the 1130 without the Molded-in Hitch Pockets so I assume I will need the TOW HITCH ADAPTER KIT.

    #1110 Otter Pro Mini Sled – 44″ L x 22″ W x 11″ H = 8 LBS
    #1120 Otter Pro Small Sled – 54″ L x 26″ W x 13″ H = 16 Lbs
    #1100 Otter Pro Small Ultra-Wide Sled – 54″ L x 32″ W x 13.5″ H = 24 LBS
    #1130 Otter Pro Medium Sled – 64″ L x 32″ W x 15″ H = 32 Lbs
    #1140 Otter Pro Magnum Sled – 74″ L x 38″ W x 15″ H = 42 Lbs
    #1150 Otter Pro Large Sled – 84″ L x 44″ W x 17″ H = 64 Lbs
    #1160 Otter Pro X-Large Sled – 94″ L x 42″ W x 18″ H = 75 Lbs

    Here are the different cover sizes I am guessing that the 1330 will fit my sled.

    #1300 Cover – Fits Otter Pro & Otter Wild Small Ultra-Wide Sled
    #1320 Cover – Fits Otter Pro & Otter Wild Small Sled
    #1330 Cover – Fits Otter Pro & Otter Wild Medium Sled
    #1340 Cover – Fits Otter Pro & Otter Wild Magnum Sled
    #1350 Cover – Fits Otter Pro Large Sled
    #1360 Cover – Fits Otter X-Large Sled

    My hope is that someone else out there has this same sled and will know which accessories will work with my sled, here are a few pics of my sled.

    Richard V.
    Somewhere over the rainbow
    Posts: 2595
    November 24, 2011 at 2:11 am #1011707

    Steve I think your sled is a little out dated for the acessories available today. Since the pictures do not show the pockets for the tow bar attachment, I would guess what you have is similar to the sport sleds of today. Here is the link to the sport sleds page on Otters site. I have not priced the sleds lately but I think you can get a Otter Cabin for about $100 and you will save yourself the headache of trying to find something that will fit the sled you have already.

    Steve Vick
    New London, MN
    Posts: 428
    November 24, 2011 at 3:42 am #1011734

    Steve, look on the outside, back of the sled….is the size/model molded into the sled?

    cat dude
    Arlington, MN
    Posts: 1389
    November 24, 2011 at 3:53 am #1011735

    Very nice doe.

    Steve Plantz
    SE MN
    Posts: 12241
    November 24, 2011 at 1:25 pm #1011791

    Quote:

    Steve, look on the outside, back of the sled….is the size/model molded into the sled?

    I will check again but the last time I looked the only thing I found was a sticker with a warning not to pull faster than 10MPH with a sled or ATV, there was another sticker below that one at one time that is wore off.

    Steve Plantz
    SE MN
    Posts: 12241
    November 25, 2011 at 1:13 pm #1011959

    Quote:

    Steve, look on the outside, back of the sled….is the size/model molded into the sled?

    Nope, I sent an email to Otter customer service hopefully they will be able to help me out.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.