Ice jig rust

  • jerad
    Otranto, IA/Hager City, WI
    Posts: 616
    #1484746

    I must have put away my ice jigs with some moisture in the Clam box last year. I have some rust on all of my jigs and spoons. Has anyone tried removing the rust with Coca-Cola? It looked to work pretty good on youtube videos.

    WinnebagoViking
    Inactive
    Posts: 420
    #1484752

    been there. dilute some CLR bathroom cleaner and soak the jigs in the solution and brush with an old toothbrush. might be useful to touch up the hook points with a hook sharpener before putting back in the box.

    norge
    Posts: 198
    #1484754

    Is CLR a brand name or a contraction of a name? Don’t know what it is.

    jerad
    Otranto, IA/Hager City, WI
    Posts: 616
    #1484758

    CLR – Calcium Lime Rust

    I was thinking that would be a little hard on the paint.

    WinnebagoViking
    Inactive
    Posts: 420
    #1484760

    Yes, CLR is a brand name (stands for Calcium-Lime-Rust, I believe). Should be available at any grocery store.

    WinnebagoViking
    Inactive
    Posts: 420
    #1484766

    CLR – Calcium Lime Rust

    I was thinking that would be a little hard on the paint.

    Full strength might. It shouldn’t be if you dilute it some. Maybe try a test jig or 2 before you dump ’em all in.

    tight_lines
    SE Minnesota
    Posts: 104
    #1484806

    Take one of those silica gel dessicants you get when you buy new shoes and throw that sucker in your jig box. I would actually recommend throwing one in every tackle box. They help soak up that extra moisture left from changing lures. It has helped a lot to cut down on the rust for my gear.

    Bryan smith
    Waupun wisconsin
    Posts: 3
    #1486031

    I must have put away my ice jigs with some moisture in the Clam box last year. I have some rust on all of my jigs and spoons. Has anyone tried removing the rust with Coca-Cola? It looked to work pretty good on youtube videos.

    belletaine
    Nevis, MN
    Posts: 5116
    #1486035

    Take one of those silica gel dessicants you get when you buy new shoes and throw that sucker in your jig box. I would actually recommend throwing one in every tackle box. They help soak up that extra moisture left from changing lures. It has helped a lot to cut down on the rust for my gear.

    Great idea!

    Tom Sawvell
    Inactive
    Posts: 9559
    #1486047

    Mix a little vinegar and dish detergent together and add to hot water. Use the old toothbrush after allowing the jigs to soak in the solution for a few minutes. Put the cleaned jigs in a kitchen sieve and run super hot water over them long enough to get them hot, then when drained spread them out on a couple layers of paper towel to fully air dry.

    It seems that once rust has a toe hold in a storage box it comes back very easy. The silica gel packets are great in a situation like this, just be certain to put the packet in an empty cell in the box by itself.

    francisco4
    Holmen, WI
    Posts: 3607
    #1486077

    <div class=”d4p-bbt-quote-title”>tight_lines wrote:</div>
    Take one of those silica gel dessicants you get when you buy new shoes and throw that sucker in your jig box. I would actually recommend throwing one in every tackle box. They help soak up that extra moisture left from changing lures. It has helped a lot to cut down on the rust for my gear.

    Great idea!

    x2!!

    FDR

    bronzbak
    Long way from home
    Posts: 316
    #1486337

    That’s why I use the jig boxxes with the blue anti rust inserts! Guys spend all that money on tungsten jigs and put them in a junk clam or similar box and have them rust. What a waste of money!

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.