Ice castle wheel won’t spin

  • fishking22
    Posts: 47
    #1845750

    I have a 2009 ice castle I just bought this year and went to put it away for the winter and when I hooked it up and went to move it the left wheel will not spin. The last time I had it out was probably about a month ago and everything worked fine. Does anyone know what my most likely issue is and how to fix?

    castle-rock-clown
    Posts: 2596
    #1845792

    Does it have trailer brakes, and what type, surge or electric. Or it could be a rusted/ frozen bearing spindle in which case at very least a new bearing job including races and seals.

    fishking22
    Posts: 47
    #1845809

    It came loose after and cranked the fish house up and down. It’s an electric break system. Obviously though I want to fix the problem now so it doesn’t get worse and happen again.

    arcticm1000
    New Richmond, WI
    Posts: 740
    #1845830

    I would guess that it is something with the brake. It could probably use some maintenance and some new parts, they get rusty. I redid mine a couple of years ago. The adjusters on the bottom that spreads the pads were seized and needed to be replaced.

    castle-rock-clown
    Posts: 2596
    #1845834

    Electric brakes are a different animal. They use an electromagnetic puck that contact the inner face of the hub. Your wheel off the ground should rotate smooth and freely. I would inspect bearings and check inner face of brake hub for corrosion. One last thing with the brakes, there should be a breakaway cable, make sure it’s in the travel position and not tripped.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.