Good Morning, a friend of mine has this unit,
and is not able to find or program the water
temp on her screen. It has to come thru the
transducer. Would anyone be able to put out
a quick tutorial on getting it set up.
Thanks, Jack
Press Menu/Press Menu/ scroll across top menu tabs to Set up tab/scroll down to Advanced mode/select(right arrow) Now more options will appear.
While in the same window/menu scroll down to Readouts.
Scroll through and select the desired readouts I think there are 4 or 5 readout boxes available. She will see a menu for each readout of many things and not limited too: Temp/time/depth/volts/datetime/etc…
She can select a readout type for each overlay or just turn on the ones she wants.
I have found it best to turn on overlays after that step. The readouts will appear in translucent boxes and are easier to see but do cover a bit of the screen.
The newly selected Temp readout should be on the left hand side of the screen with all the other readouts she selected.
Who do I send the invoice too? HA!
Wormdunker,
Thank you taking the time, this will help
a lot.
Have a great season.
Jack
good info, i would also first verify you have the most recent firmware installed that allows the newer overlay display options..
Possible the temp sensor in the ducer is shot and doesn’t work?
not sure why
but
my temp overlay only shows on some views
Yeah for some reason I don’t get temp when I have navigation/gps screen on either my bow or console graph. They are networked, both have temp sensors.
You must be logged in to reply to this topic.
