Hub shelter

  • Jason Sanchez
    Posts: 2
    #2157355

    Hi everyone,

    I’m trying wire up 4 led lights in my hub shelter. I want to run them on a Milwaukee m18 to 12v adapter with a usb plug, but it does not work. If I touch the wire ends to my vexilar battery they work just fine. Any help would be appreciated. Thanks

    Jason

    Attachments:
    1. 16677715747762249298759509045303.jpg

    2. 16677715508612700011488108437032.jpg

    mojo
    Posts: 723
    #2157360

    That adapter only puts out around 5 volts at the USB port. The USB port is not a 12v output, so the 12v lights will not run off that port.

    mojo
    Posts: 723
    #2157362

    This is the type of adapter, with two lead wires coming from it, that you can run 12v accessories with. I do NOT have any experience with this particular adapter, it’s just the first one that popped up on Amazon for reference.

    M18 12v adapter

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.