Hi my name is Randy I have a question regarding in 08 Toyota tundra VSC sensor.

I need information on VSC sensor 08 Toyota tundra. my question is what is the factory setting for the sensor what angle is it set on coming from the factory?

You can set the angle by cutting the fin off a 30 inch walleye and putting it between the sensor and the cam alignment line and tighten it down. You can only use the fin 1 time because it will shrink as it dries up so each time you reset it you need another 30 inch walleye. If all you can fund are 29 inch walleyes be sure and add 1 degree.

https://www.tundras.com/

If you are just having issues due to adding a lift kit or leveling kit you can just do the recalibration procedure. You can find it on tundratalk.net or tundras.com.