Helix 7 mounting help

I have a 2006 Yamaha Grizzly 660. Any suggestions on how to mount a Helix 7 or 9 for gps use only? Pics would be great. Thanks-

I would say a RAM mount. But there may be some better options out there.

Powerboat Fishfinder Mounts

Thanks but I’m not sure where or how to mount the base on the ATV.

In this post you can see what I did on my CanAm Outlander. I removed the center handlebar cover and used the handlebar mount. Just need new extended grade 8 bolts and it is the best option I have found. Works awesome and the GPS seems to get very little abuse/vibrations/etc in this location.

http://www.in-depthoutdoors.com/community/forums/topic/best-gps-unit-for-atving/

they make a clamp for atv handle bars

I recently mounted my 7″ Garmin on my wheeler, using a smaller RAM mount I had laying around.

I installed the ball on the fender, then laid the arm down to the rack and put two zip ties on it to take the jiggle factor out.

If you’re mounting with a ball alone, you’ll want the biggest RAM (2.25″? off the top of my head) and have the ball on something rigid (like the rack or handlebars).

Attachments:

1. 

   PXL_20221204_200859793.MP_-scaled.jpg
   

2. 

   PXL_20221204_200851785.MP_-scaled.jpg
   

Stablimount, I know the guy who owns it, he’s got all sorts of options

Thanks. I like that!