Helix 7 g3

  • leeland13
    Posts: 23
    December 27, 2019 at 9:52 pm #1901061

    Is anybody having issues seeing their jig? I pick up bottom but can’t see my jig messed with settings for a hour. Have the x9 1521 transducer. Ty need all the help I can get.

    Ice Cap
    Posts: 2151
    December 28, 2019 at 7:03 am #1901109

    Does your G3 have GPS? I think that transducer is compatible with the Chirp GPS unit only. You switched to Ice Mode? Run a system self check on start up? Do you run this unit in open water as well? If you do you have to switch over to the 1521 transducer in the menu system. Transducer below the ice? Could be lots of things I guess.

    Walleyeguy34
    Posts: 173
    December 28, 2019 at 10:05 am #1901138

    Can you see it with your gain turned way up? Also try manually adjusting the lower range to a few feet deeper than you are fishing instead of using the auto range. I’m able to see small panfish jigs 30ft down with my gain on 10.

    S LeClerc
    NECT
    Posts: 8
    January 3, 2020 at 2:54 pm #1903085

    In a-scope mode I run a gain of 11 for tungsten’s.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.