Are you guys able to mark more than one spot on a Side Scan Image?
On my unit, the Mark option in the menu goes away after I make one waypoint and I also lose the Mark Option in the menu at times and am not able to get it back until I power the unit off and turn back on.
Also, in my color scheme, it seems to me that Grey and Inverse are mixed up in the labeling. Not a big issue but not intuitive.
What unit do you have?
IM confused a bit, because there is no “mark” menu option. Its simply a mark button and you can use it as often as it takes to complete the mark, usually a couple seconds, depending on if its a actual waypoint or a screen capture, with the screen capture lag time being directly related to the speed of the sd card.
I have a 981C…1st generation unit. Crap, that probably means nobody here can help unless they have a 981 or a 987.
Try asking your question here, on the 981/987 forum.
http://www.xumba.scholleco.com/viewforum.php?f=7&sid=f17d31c797845ef5af90396b1246cea4
I’ll do that, thanks.
You must be logged in to reply to this topic.
