Suggestions on how to rig a 1157 and 998 SI?

  • mnwalleyehunter
    Posts: 108
    #1358774

    Earlier this spring I bought a 998 SI that I mounted at the console. I have since gotten a fairly good deal on a 1157. How would you guys rig these?? I really like having the big screen 1157 at the console, but if I move the 998 up to the bow and run it off my Terrova Universal Sonar, I will not have SI. Anyone else have this problem, and how did you solve it??

    FishBlood&RiverMud
    Prescott
    Posts: 6687
    #1412580

    I’d put them right next to each other.

    998 runs SI
    1157 runs GPS chart and sonar.

    That’s how i would do it.
    Link them together of course.

    mnwalleyehunter
    Posts: 108
    #1412590

    The problems with that are:
    1) Then I have no graph at the bow when I’m up there riggin or jigging.
    2) On my skeeter, I don’t think there is enough room for both of them

    eyekatcher
    Lakeville, MN
    Posts: 964
    #1412601

    I would add an SI transducer to the Terrova.
    There is a really good resource on how to mount this from a fellow IDO member with pictures.

    artifishal
    Posts: 216
    #1412900

    I would mount the 1157 up in the bow and leave the 998 on the console. That way you are still able to utilize both screens for any type of fishing.

    castle-rock-clown
    Posts: 2596
    #1412936

    I mounted my 999 on a ram ball on the drivers side gunnel at the console. When fishing on the bow I simply loosen the arm and swivel it facing the bow seat. I have my si transducer mounted to a dedicated deployment arm at the bow.

    Wade Boardman
    Grand Rapids, MN
    Posts: 4453
    #1413223

    Quote:


    I would mount the 1157 up in the bow and leave the 998 on the console. That way you are still able to utilize both screens for any type of fishing.



    X2. With that 10″ screen you can use the 1157 as the GPS unit even at WOT.

    Jeremiah Shaver
    La Crosse, WI
    Posts: 4941
    #1413433

    Quote:


    The problems with that are:
    1) Then I have no graph at the bow when I’m up there riggin or jigging.
    2) On my skeeter, I don’t think there is enough room for both of them


    There is no problem – you just need another unit!!!

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.