When you power the unit on, first you will get a screen that says “loading”:
The next sceen, (which stays up for about 5 seconds) has an option at the bottom that says “Press Menu for Startup Options”
Press menu while that screen is up.
this will take you to a screen that has 4 options 1) Normal
2) Simulator, 3) System Status and 4) PC connect.
Select Simulator
Press exit to continue
then press views (4 times i think)till you get to the full gps screen.
This should have you somewhere on the tip of Florida.
Use the 4way cursor to move the crosshairs up to your mapping area, and if you have a mapping chip in, you should see alot of little boxes on your screen at this zoom level.
Zoom in and move the cursor till you get over your target lake, and then zoom in to the desired level to see the detail on the mapping chip.
Enjoy!
All models of Humminbirds require the same keystrokes to do this.
System status will take you to your Serial number, Model, software version,voltage and the hours on your machine.
Pressing view once, while in System stauts will show you all accessories, connected and unconnected.
You cannot get back to a regular screen from the system status menu, without powering the unit off and bringing it back up