GMC guys

  • SLACK
    HASTINGS, MN
    Posts: 711
    April 20, 2015 at 8:14 am #1535985

    I have a 06 HD 1/2 ton (6.0 liter) and I just noticed the other day that when i start the truck the oil pressure gauge jumps all the way up and stays there. any ideas what may cause this.

    thanks

    suzuki
    Woodbury, Mn
    Posts: 18700
    April 23, 2015 at 1:06 pm #1537203

    Turn the key forward but don’t start engine (KOEO). If the needle jumps to 80 without engine running, it’s a bad oil sending unit (sensor). It’s located on top of the engine in the back near the fire wall (hard to reach/see).

    trumar
    Rochester, Mn
    Posts: 5967
    April 23, 2015 at 3:54 pm #1537269

    Replace the oil sending unit waytogo

    rippinlips0414
    Aberdeen, SD
    Posts: 33
    April 24, 2015 at 10:00 am #1537481
    trumar wrote:

    Replace the oil sending unit waytogo

    Yes replace your oil sending unit. This is a common issue in these years along with the 5.3 liters. GM part number is 12616646. Retail is right around $90.00 for OEM

    Attachments:

    1. 20150424_093834.jpg

    SLACK
    HASTINGS, MN
    Posts: 711
    April 24, 2015 at 11:12 am #1537514

    thanks for help guys all is back to normal.

    jon_wbl
    Posts: 289
    April 25, 2015 at 3:17 am #1537827

    03-06 GM gauge clusters are also known for having issues

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.