Boat Cover Prefab or Custom?

  • rockriver
    Posts: 39
    January 19, 2011 at 5:01 pm #1269285

    I’ve got the basic rig 16.5 foot tiller steer v bottom 78-79 inch beam with bow mount troller so it should be easy to get a quality cover. Right? I need your help. Have you bought and had success with Cabela’s or Overton’s or other brand pre made-measured cover or were you disappointed? I would like to travel with the boat covered. Unfortunately the boat will be stored outside . I’ve had previous boats and always gotten a cover made to fit but this boat size/shape seems like it would make sense.
    Thanks, Paul

    bullcans
    Northfield MN
    Posts: 2026
    January 19, 2011 at 5:10 pm #927898

    Definetely go with custom especially if it’s going to be stored outside. I went through so many pre-fab covers that i could have paid for my custom 3x’s over.
    It’s well worth the investment!

    joe-winter
    St. Peter, MN
    Posts: 1281
    January 19, 2011 at 5:38 pm #927930

    custom all the way. no question.

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 60010
    January 19, 2011 at 5:39 pm #927931

    I’m on my second prefab and the only place I go is to LOTW’s once per year…and 30 miles twice for storage.

    Much better off with a custom if funds allow.

    t-ellis
    Colorado Springs, CO
    Posts: 1316
    January 19, 2011 at 5:53 pm #927907

    Quote:

    custom all the way. no question.

    X2

    John Schultz
    Inactive
    Portage, WI
    Posts: 3309
    January 19, 2011 at 5:56 pm #927910

    Quote:

    Quote:

    custom all the way. no question.

    X2

    X3

    fireline
    Rochester
    Posts: 813
    January 19, 2011 at 6:37 pm #927962

    x4 but make you have all your toys mounted first .

    bullcans
    Northfield MN
    Posts: 2026
    January 19, 2011 at 7:01 pm #927975

    Good point Fireline!
    As well as have all your pedestal seats mounted first too

    Geerdes
    Brandon, SD 57005
    Posts: 793
    January 19, 2011 at 11:16 pm #928117

    Custom X2

    Randy Wieland
    Lebanon. WI
    Posts: 13884
    January 20, 2011 at 12:25 am #928003

    I don’t know where your located at…assuming WI. Boat Tailors along I-94 in Racine, County does a very nice job with travel covers

    flatfish
    Rochester, MN
    Posts: 2104
    January 20, 2011 at 1:48 am #928087

    Hey Rock>sent you a PM

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.