Just wondering what you guys use on your snowmobiles to pull the house behind it. I just put the hitch on my Voyeger and now need a way to connect it to the snowmobile. Any ideas?
February 19, 2009 at 2:57 pm
#1261681
Hitch for snowmobile
-
February 19, 2009 at 3:16 pm #750363
My older sled has a hitch that looks like an old door hinge. Bolt one side under the seat and leave the other end out.
February 19, 2009 at 3:21 pm #750367I found a hitch system for another brand of sled and used U bolts to clamp it to the back bumper of my MXz…. looks kinda jerry rigged but it works GREAT.
February 19, 2009 at 5:22 pm #750423Just welded a piece of 3/8″ x 3″ flat under the back bar of the snowmobile. Drilled a big enough hole for the hitch pin. Welded it at a slight angle- we held the hitch up to the snowmobile with someone sitting on it. That seems to lessen any possible resistance and wear.
Been working good for a few years now
February 19, 2009 at 5:41 pm #750433Parts Unlimited or Kimpex make a couple of different sized hitches that bolt to the bumper. You should be able to find one at a snowmobile shop for under $20.
http://www.denniskirk.com/1/1/41529-parts-unlimited-tow-hitch-universal-82402045.html
February 20, 2009 at 12:07 am #750584I bought one at Cabelas in the ATV section that worked well on my Arctic Cat for about $20.It had U bolts so I didnt have to drill any holes in the bumper.
Viewing 6 posts - 1 through 6 (of 6 total)
You must be logged in to reply to this topic.