Looking for an out of work electrician

  • Steve Plantz
    SE MN
    Posts: 12240
    February 19, 2009 at 4:50 am #1261676

    Any out of work electrician’s out there in the Rochester area? If so shoot me a PM.

    hooknfinger
    Rochester, Minnesota
    Posts: 1290
    February 19, 2009 at 2:17 pm #750315

    What do you want done?

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59994
    February 19, 2009 at 2:24 pm #750320

    110 volts or 220?

    Let me know what your looking to have done.

    sgt._rock
    Rochester, MN
    Posts: 2517
    February 19, 2009 at 2:46 pm #750335

    I’m not an electrician but have played one on TV. Yep 220 / 221 whatever it takes. What do you need Steve?

    Tom Sawvell
    Inactive
    Posts: 9559
    February 19, 2009 at 2:55 pm #750345

    Sarge’s nickname is Buzz. The picture speaks volumns as to why.

    sgt._rock
    Rochester, MN
    Posts: 2517
    February 19, 2009 at 3:10 pm #750353

    That’s what I found when I took the paneling down. I fixed it. The inspector even said it looked good.

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59994
    February 19, 2009 at 4:31 pm #750399

    …and the sponge is for??

    kooty
    Keymaster
    1 hour 15 mins to the Pond
    Posts: 18101
    February 19, 2009 at 4:34 pm #750402

    Haven’t you watched the Green Mile??

    Kevin J Dobbs
    La Crosse. WI
    Posts: 78
    February 19, 2009 at 8:57 pm #750517

    Steve ,let me know if you got my PM,I am not sure it got sent.KD,I have seen worse than that SGT.

    mbenson
    Minocqua, Wisconsin
    Posts: 3842
    February 19, 2009 at 10:36 pm #750553

    Rock:

    I thought maybe you stayed at a Holiday Inn last night…

    Mark

    sgt._rock
    Rochester, MN
    Posts: 2517
    February 19, 2009 at 11:06 pm #750565

    Quote:

    …and the sponge is for??

    Well you wet the wires for better continuity of course. I know you fished in the dark but didn’t realize you lack light during daylight hours too.

    Actually it’s for wiping the sweat from my brow whenever I work around hot wires.

    Steve Plantz
    SE MN
    Posts: 12240
    February 20, 2009 at 3:30 am #750694

    Thanks for all replies and PM’s, I got quite a few of them so I decided to post here instead of reply to all of them. We just need a few odds and ends done nothing major, need a few outlets in our basement, one light switch needs rewiring, wife wants a new light fixture in the bathroom, the old one acts up sometimes and will not work. We will also need to eventually put up a new ceiling fan in the kitchen but need to paint the ceiling first. Last but not least the door bell does not work, we put in a new door this fall with a new built in door bell the problem is the old wire is so brittle that it breaks when you try and screw the wire down. For those of you that sent PM’s that are out of town I am thinking that it would probably not be worth the drive for you.

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.