4 stroke motor oil?

  • TazTyke
    Central Minnesota
    Posts: 473
    #1255316

    What kind of motor oil do you run in your Yamaha out board. I want run synthetic instead of Yama-Lube?

    KirtH
    Lakeville
    Posts: 4063
    #586403

    I ran AMSOIL synthetic blend for small engines.

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59992
    #586431

    Check out our sponsor Klotz Lube.

    I’m getting ready to open my fifth gallon. Love the smell!

    …besides Klotzman Rick is a nice guy. (Just don’t let him know I’m starting rumors about him.)

    KirtH
    Lakeville
    Posts: 4063
    #586492

    Does Klotz make a 4 Stroke motor oil?

    klotzlubemn
    West metro, MN
    Posts: 47
    #586532

    Yes,
    Klotz makes motor oils for most all applications.
    They make a 5w-20, 10W-30, 10W-40, and a 20W-50 for 4 strokes. I have all but the 5W-20 on hand right now, but will be getting that 5W-20 in a couple of weeks. These oils all are 100% synthetic oils.
    I sell them by the quart for 8.00 each or by the gallon for 22.00.

    They also carry specialized oils for certain applications such as V-Twin oil forumulated for Harley’s and a 100% synthetic oil for motorcycles also.

    Another product that I sell alot of is the the MX-4 oil which is an oil made especially for ATV applications. Again, it is a 100% synthetic and is made to withstand high heat that ATV’s can experience when you are back in the woods, full of mud and your cooling system is comprimised. This oil is designed for wet clutch applications and will not degrade them over time like some oils will.

    Obviously, with the 4 stroke boat motor, you don’t get as much of that good Klotz odor from the exhaust, but it is still a great oil.

    Any questions let me know. You can either PM me, call or email me.

    Rick
    763-479-2478

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59992
    #586533

    Quote:


    Obviously, with the 4 stroke boat motor, you don’t get as much of that good Klotz odor from the exhaust,


    Another reason to stick with a 2 pumper!

    klotzlubemn
    West metro, MN
    Posts: 47
    #586536

    And I ship oil all the time, so if you are concerned about availability, I typically use Spee-Dee delivery for the 5 state area (they do next day delivery on their cheapest rate!) I also use UPS for farther shipments and the Post Office works the best for my Canadian shipments. Shipping typcally runs about 3.00 per gallon in MN an surrounding states. 3.00 / gallon of gas VS. 3.00 per gallon shipped to your door? Even Brain knows the value there…

    I am located in Maple Plain if you want to pick it up here also.

    Rick

    Brian Klawitter
    Keymaster
    Minnesota/Wisconsin Mississippi River
    Posts: 59992
    #586543

    Quote:


    Even Brain knows the value there…


    Ahh…you know me well as you spelled my name correctly.

    superstar
    Breezy Point, MN
    Posts: 207
    #587572

    Would Klotz be FC-W certified? Just curious for warranty purposes. Thanks

    klotzlubemn
    West metro, MN
    Posts: 47
    #587811

    Quote:


    Would Klotz be FC-W certified? Just curious for warranty purposes. Thanks


    Here is a link directly to the Klotz Web site that shows the specs on the outboard oil. This is the info that would be on the label of the container and actually a little bit more info. http://www.klotzlube.com/tech/KL-332.pdf

    It will show you that the oil meets and exceeds all manufacturer warranty requirement when a JASO FC, ISO-L-EGD +, API TC-W or TCW-3 oil is required,including Mercury, Mariner, Evinrude, Johnson, Nissan, Suzuki, Yamaha and Tohatsu.

    Short answer – “Yes it does”

    (This is the info on the 2 stroke oil for premix or oil injection)

    Rick

    superstar
    Breezy Point, MN
    Posts: 207
    #587894

    Quote:


    Quote:


    Would Klotz be FC-W certified? Just curious for warranty purposes. Thanks


    Here is a link directly to the Klotz Web site that shows the specs on the outboard oil. This is the info that would be on the label of the container and actually a little bit more info. http://www.klotzlube.com/tech/KL-332.pdf

    It will show you that the oil meets and exceeds all manufacturer warranty requirement when a JASO FC, ISO-L-EGD +, API TC-W or TCW-3 oil is required,including Mercury, Mariner, Evinrude, Johnson, Nissan, Suzuki, Yamaha and Tohatsu.

    Short answer – “Yes it does”

    (This is the info on the 2 stroke oil for premix or oil injection)

    Rick


Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.