Show off your boats

  • EZ Duzit
    Member
    (UCLA) Upper Corner of Lower Alabama
    Posts: 3
    April 7, 2014 at 7:06 pm #1357637

    Can we start a thread for those that want to. Post pictures of there fishing boat? Mine is small but I’ve modified it to work well for me, But I’m from the south. Love to see some more pictures.

    dfresh
    Fridley, MN
    Posts: 3053
    April 7, 2014 at 7:18 pm #1402514

    Aside from the unbrellas, let’s see some inside pics of that BT man.

    waterice
    Elk Point, SD
    Posts: 126
    April 7, 2014 at 7:24 pm #1402518

    Here is the inside of my 79 mr pike 18. Unfortunately my new boat in in the shop for repair

    igotone
    Posts: 1746
    April 7, 2014 at 7:25 pm #1402519

    nice ride EZ

    welcome 2 to site

    EZ Duzit
    Member
    (UCLA) Upper Corner of Lower Alabama
    Posts: 3
    April 7, 2014 at 8:53 pm #1402540

    Thanks for the welcome guy’s. The inside bout the same, moved pedestals around a little, added an extra fuel tank and went to a 24 volt trolling motor and relocated the batteries and fastened the foot control to floor to keep in in place to fit me. So now I like it. Oh and added the umbrella mounts that I invented, that rotate 360 degrees around the seat totally independent of where the seat is. Just move the umbrella around you to follow the sun. Needed in lower Alabama.

    Aint seen a man yet that fish and worry at the same time

    Randy Wieland
    Lebanon. WI
    Posts: 13661
    April 8, 2014 at 5:20 am #1402552

    EZ Duzit, Welcome to IDO

    With all the talk on LL about launching jigs at boats, people not getting along…..I’m thinking about a minor upgrade

    belletaine
    Nevis, MN
    Posts: 5116
    April 8, 2014 at 5:23 am #1402553

    Nothing like a five inch 38 to get a guys attention.

    Steve Plantz
    SE MN
    Posts: 12240
    April 8, 2014 at 7:31 am #1402593

    Welcome to IDO EZ Duzit!

    Like Mark said in his reply above we have a place where members can post pics of their rigs in the Group Forums, called Rate my Rig (open water) there you will find several boats that members have posted. You will need to send a onetime request to gain access then you will be good to go. Below is a link to my post of my boat in the Rate my Rig forum, which reminds me I am in the process of adding new to me electronics to my boat, I will have to update my pics when I am done.

    Steve’s 1650 Lund Angler SS

    walleyenordy
    Cottage Grove, MN
    Posts: 502
    April 8, 2014 at 9:10 am #1402623

    Here are my boats nothing special. But I love them! I have also did some updates to the first boat and will post more in RATE MY RIG Group later.
    BTW nice pics of boats they all look fun!!!




    eyekatcher
    Lakeville, MN
    Posts: 968
    April 8, 2014 at 9:39 am #1402627

    FYI
    Menards has marine ply on sale this week

    EZ Duzit
    Member
    (UCLA) Upper Corner of Lower Alabama
    Posts: 3
    April 9, 2014 at 12:31 pm #1402939

    NICE Boat

    FryDog62
    Posts: 3696
    April 10, 2014 at 10:22 am #1403158

    Hoping to get the Yar out in the next week or so and maybe look for some crappies somewhere ??

    Mudshark
    LaCrosse WI
    Posts: 2973
    April 10, 2014 at 12:08 pm #1403204

    Not fancy by any means…..but it works

    stuart
    Mn.
    Posts: 3682
    April 10, 2014 at 12:16 pm #1403209

    Grandpas boat.

    Ralph Wiggum
    Maple Grove, MN
    Posts: 11764
    April 10, 2014 at 12:20 pm #1403212

    Quote:

    Not fancy by any means…..but it works


    I love the tow vehicle! Is that a Roadmaster?

    belletaine
    Nevis, MN
    Posts: 5116
    April 10, 2014 at 12:47 pm #1403221

    2004 Pro V 115 Yamaha

    Mudshark
    LaCrosse WI
    Posts: 2973
    April 10, 2014 at 12:48 pm #1403223

    Quote:

    Quote:

    Not fancy by any means…..but it works


    I love the tow vehicle! Is that a Roadmaster?

    Yes sir
    1994 Estate- with the LT1(retuned corvette DI)motor..I have no troubles merging in traffic..

    She’s only got 220,000 miles so it’s just broke in

    belletaine
    Nevis, MN
    Posts: 5116
    April 10, 2014 at 12:50 pm #1403225

    Quote:

    Welcome to IDO EZ Duzit!
    Like Mark said in his reply above we have a place where members can post pics of their rigs in the Group Forums, called Rate my Rig (open water) there you will find several boats that members have posted. You will need to send a onetime request to gain access then you will be good to go. Below is a link to my post of my boat in the Rate my Rig forum, which reminds me I am in the process of adding new to me electronics to my boat, I will have to update my pics when I am done.

    Steve’s 1650 Lund Angler SS

    Steve, I had a 94 Angler deluxe that I traded in a old Alumacraft Lunker with a semi V hull. The first time I got it on the water I was amazed at how smooth it rode. I kinda wish I still had it.

    life1978
    Eau Claire , WI
    Posts: 2790
    April 10, 2014 at 1:49 pm #1403286

    Quote:

    Not fancy by any means…..but it works

    Mud thats what I’d like for a river boat around here someday.

    Steve Plantz
    SE MN
    Posts: 12240
    April 10, 2014 at 7:29 pm #1403369

    Quote:

    Quote:

    Welcome to IDO EZ Duzit!
    Like Mark said in his reply above we have a place where members can post pics of their rigs in the Group Forums, called Rate my Rig (open water) there you will find several boats that members have posted. You will need to send a onetime request to gain access then you will be good to go. Below is a link to my post of my boat in the Rate my Rig forum, which reminds me I am in the process of adding new to me electronics to my boat, I will have to update my pics when I am done.

    Steve’s 1650 Lund Angler SS

    Steve, I had a 94 Angler deluxe that I traded in a old Alumacraft Lunker with a semi V hull. The first time I got it on the water I was amazed at how smooth it rode. I kinda wish I still had it.

    I will give you a call when I am ready to trade up.

Viewing 22 posts - 1 through 22 (of 22 total)

You must be logged in to reply to this topic.