Graph on the dash of wheeler or pick-up truck

  • Coreyhuberty
    Brainerd,MN
    Posts: 322
    #1277972

    What does a guy need to make this happen?
    Is just purchasing power cord to go into cigarette lighter?

    Thanks,
    Corey

    bck
    Big Stone Lake Sd
    Posts: 257
    #1081157

    Yep! Pretty simple. $39.99 for the Lowrance cord I believe. I put RAM ball mounts on my 4-wheeler and sled, now I can use the GPS from my boat to ice fish.

    Coreyhuberty
    Brainerd,MN
    Posts: 322
    #1081181

    What if you don’t have a cigarette lighter power source on wheeler,
    What’s next option?

    fish_any_time
    Champlin, MN
    Posts: 2097
    #1081184

    Quote:


    What if you don’t have a cigarette lighter power source on wheeler,
    What’s next option?


    I wired mine directly to the starting battery.

    Steve Root
    South St. Paul, MN
    Posts: 5623
    #1081236

    Quote:


    Quote:
    What if you don’t have a cigarette lighter power source on wheeler,
    What’s next option?

    I wired mine directly to the starting battery.


    Just be careful when you do this, not all GPS units run on 12 volts. The hand held jobs usually have a voltage regulator circuit inside the cigarette lighter plug that reduces the voltage. A regular “in the boat” unit should be OK.

    Rootski

    Bob/MN
    Posts: 58
    #1081248

    Most auto supply stores stock the female cigarette receptical.

    fish_any_time
    Champlin, MN
    Posts: 2097
    #1084590

    Quote:


    Quote:


    Quote:
    What if you don’t have a cigarette lighter power source on wheeler,
    What’s next option?

    I wired mine directly to the starting battery.


    Just be careful when you do this, not all GPS units run on 12 volts. The hand held jobs usually have a voltage regulator circuit inside the cigarette lighter plug that reduces the voltage. A regular “in the boat” unit should be OK.

    Rootski


    I’m running an LMS-522.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.