Frictionless World Clam Electric Auger Issues

  • bigfatpike
    Rochester NY
    Posts: 20
    #2208782

    So i got the clam 120volt electric ice auger for a sweet deal back in January 2020 but starting after that season when ever i start drilling just after wards and right before it breaks through usually it tends to twist to the point that I have to stop and move with it so I don’t get sent flying and someone i know and from what i have seen from other electric augers it doesn’t have that problem and since i can’t contact frictionless world about it I was wondering what causes this and what to do about it?

    Huntindave
    Shell Rock Iowa
    Posts: 3092
    #2208789

    I don’t fully understand why you and no one else would be having an issue. Do you wear a good gripping set of cleats when you are on the ice. Having good contact with the ice prevents many issues and accidents when out on the ice.

    bigfatpike
    Rochester NY
    Posts: 20
    #2208790

    I don’t fully understand why you and no one else would be having an issue. Do you wear a good gripping set of cleats when you are on the ice. Having good contact with the ice prevents many issues and accidents when out on the ice.

    Do you know how a drill or impact driver will have kickback
    My auger will do the same thing which is something I haven’t noticed and my friend said hasn’t happened with his

    And I hold and drill the exact same way the6 do

    Coletrain27
    Posts: 4789
    #2208792

    I would check the blades first. They may be dull

    bigfatpike
    Rochester NY
    Posts: 20
    #2208796

    I would check the blades first. They may be dull

    How do you test the blades and how do you sharpen without messing the blades up I have been unable to find places around me that would sharpen the blade

    Coletrain27
    Posts: 4789
    #2208797

    There are companies you can mail them to and they will sharpen and return. Otherwise you could buy a new set of blades.

    LabDaddy1
    Posts: 2496
    #2209964

    Yeah u may just want to buy a new set depending on price/hassle

    bigfatpike
    Rochester NY
    Posts: 20
    #2212159

    Yeah u may just want to buy a new set depending on price/hassle

    What blades should i get

    CaptainMusky
    Posts: 23377
    #2212943

    For starters if your buddies have the same drill, Id have them use yours and you theirs and see if they have issues and vice versa. As weird as it may seem to be it could 100% be you that is the problem.
    I had issues with my strikemaster the first few times I tried it but I was letting up on the throttle just as I was about to break through. Now I hold it wide open the whole time and no issues whatsoever.

    bigcrappie
    Blaine
    Posts: 4376
    #2213077

    I am just sorry you bought the Calm auger, A buddy bought their gas auger a few years back and that thing was the biggest piece of junk ever.

    CaptainMusky
    Posts: 23377
    #2213083

    I am just sorry you bought the Calm auger, A buddy bought their gas auger a few years back and that thing was the biggest piece of junk ever.

    To be fair it was just a blue Strikemaster. Those Solos can be very finicky to start, but mine was fantastic. There is a routine to starting them and the gas lines were known to go bad but other than that it was fantastic. Now I have an electric 40v and wont go back. Something I never thought I would say.

    bigfatpike
    Rochester NY
    Posts: 20
    #2213085

    For starters if your buddies have the same drill, Id have them use yours and you theirs and see if they have issues and vice versa. As weird as it may seem to be it could 100% be you that is the problem.
    I had issues with my strikemaster the first few times I tried it but I was letting up on the throttle just as I was about to break through. Now I hold it wide open the whole time and no issues whatsoever.

    Buddy didn’t have the same brand drill

    I am just sorry you bought the Calm auger, A buddy bought their gas auger a few years back and that thing was the biggest piece of junk ever.

    My other buddy is able to use it and it didn’t always do this i also got the thing for $200

    <div class=”d4p-bbt-quote-title”>bigcrappie wrote:</div>
    I am just sorry you bought the Calm auger, A buddy bought their gas auger a few years back and that thing was the biggest piece of junk ever.

    To be fair it was just a blue Strikemaster. Those Solos can be very finicky to start, but mine was fantastic. There is a routine to starting them and the gas lines were known to go bad but other than that it was fantastic. Now I have an electric 40v and wont go back. Something I never thought I would say.

    I thought it was the rebranded trophy strike auger

    CaptainMusky
    Posts: 23377
    #2213087

    The Blue Clam gas augers at least at one point were strikemaster solos. Maybe they changed.

    mahtofire14
    Mahtomedi, MN
    Posts: 11040
    #2213177

    The one he is talking about is the clam 120V electric auger. Not the old gas ones.

    bigfatpike
    Rochester NY
    Posts: 20
    #2237594

    Alright i bought the new blades on sale hopefully i can try out the new blades this year

Viewing 16 posts - 1 through 16 (of 16 total)

You must be logged in to reply to this topic.