Flasher Question

  • aaronsaar
    Posts: 2
    #1445668

    My boat is not equipped with riggers. From what I read flashers seem to be the way to go versus dodgers. Can I run flashers on a dipsy diver? or does the spinning cause a problem that would prevent it?

    Ben Brettingen
    Moderator
    Mississippi
    Posts: 605
    #1445678

    I’m not an expert in any capacity when it comes to Salmon fishing, but from what I’ve learned from a little experience, you can definitely run a flasher/dodger with a dipsy.

    Ben Brettingen
    Moderator
    Mississippi
    Posts: 605
    #1445679

    I’ve also learned not to skimp on the line set-up from the dipsy to the flasher. Unfortunately James and I lost a nice fish due to a break off with 20lb fluoro. We bumped it up to 80lb….maybe a little overkill but no more break offs.

    eyecatchum
    Milwaukee WI
    Posts: 270
    #1445685

    You can absolutely run flashers on dipsys. 90% of the time, thats what my dipsys are going to have on them. Probably a spin doctor. You can really run flashers on anything. Lead, dipsys, riggers, etc. , but my favorite way to run em is on a braid or wire dipsy. On dipsys, us a long 10ft+ leader of 30lb mono between the diver and flasher. Snubbers help too, but aren’t necessary IMO when you get to leader lengths of 20ft+. Good luck!

    Joel Ballweg
    Sauk City, Wisconsin
    Posts: 3295
    #1445693

    Flasher/flys behind a dipsy diver is my favorite way to run them.
    Over the years, its also proven to be one of the most productive lines in the water.
    I run mine very similar to what Nathan described above.

    Randy Wieland
    Lebanon. WI
    Posts: 13467
    #1445706

    Flashers like Fish Flash or Big Al’s Flash from yakima are designed to have very little drag or resistance. They’re ideal for behind dipseys or other various divers since they don’t add the stress like a normal spinner blade. Plus, the lack of whipping back and forth allows for using with virtually any bait/lure trailing behind. We’ve run them with j-plugs, spoons, flies, and herring rigs (used smelt).

    aaronsaar
    Posts: 2
    #1445844

    Thanks guys. This was very helpful. Heading to Bayfield area Labor Day and again later September. Had some luck last year with Lakers on the flats by the refuge but that was earlier in the season. Any suggestions for areas to try in September where I have a chance at preferably salmon but if nothing else lakers? We got a couple cohos last year and they were delicious.

    Randy Wieland
    Lebanon. WI
    Posts: 13467
    #1445854

    I’ve only been up there a few times for trout/salmon. We stayed east of the bay and focused on tributary mouths

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.