LED trailer Lights

  • z-man
    Dousman, WI
    Posts: 1422
    #1238173

    It’s time to rewire my Shorelander, as have had a number of nuisnce problems that are easy fixes, but take time to find. Being that it’s ten years old now,also thinking about changing over to LED lights for the rear lights, and amber and red marker lights. Priced them out on line and in Farm and Fleet, and can buy the whole shooting match for just about a hundred bucks give or take, depending on the brand.
    Anyone have the LED lights, and any input on one brand over the others?

    cdn
    West Central, MN
    Posts: 338
    #902608

    I completely changed my boat trailer over to FF LED brand and they work great! Definitely worth it. No more burned bulbs, no burned fuses, so far so good. I have 2 years on it now.

    john23
    St. Paul, MN
    Posts: 2582
    #902611

    I love my LED trailer lights, but I also killed my first set due to corrosion. When I replaced that first set I bought the same lights from FFarm but opened them up and smeared silicone on the connections prior to installation. So far it seems like that was a good idea.

    sliderfishn
    Blaine, MN
    Posts: 5432
    #902621

    I switched after burning out a couple of bulbs. I installed the Optronics brand and love them

    mnbassin
    Mpls, MN
    Posts: 106
    #902673

    LED’s are the only way to go. I use Superbright leds and have not hade any issues. Good prices Fast shipping.

    sliderfishn
    Blaine, MN
    Posts: 5432
    #902678

    Hey Mike, you might want to redo your link

    mikkar
    South Saint Paul, MN
    Posts: 223
    #902712

    I went over to LEDs this year and love em bought mine for walmart and no issues

    jon_wbl
    Posts: 289
    #902726

    LEDs are the way to go. I too used the Optronix kit but the lasted 1 trip up north due to a parking lot mishap. Of course I was not there and no one left an note. I replaced the 2nd time with some steel boxes that bolt right on to the light mount holes. LEDs are recessed so note as much chance of damage. Ordered online through EBAY $69 for rear lights and boxes. Can of black spray paint and a few bolts and washers and you are set to go.

    web page

    mnbassin
    Mpls, MN
    Posts: 106
    #902734

    Thanks Ron

    Heres A picture of The superbrights on my trailer.

    z-man
    Dousman, WI
    Posts: 1422
    #902813

    Well, it’s clearly a no-brainer to make the switch. Thanks for all the feedback, fellas. Going to get them ordered, and wait for a nasty Saturday to change out the wiring and the lights.

    Ralph Wiggum
    Maple Grove, MN
    Posts: 11764
    #902941

    Quote:


    LED’s are the only way to go. I use Superbright leds and have not hade any issues. Good prices Fast shipping.


    I’ll second that. Just completely redid mine two weeks ago (after an incident with a submerged log at the launch). They are the bees knees.

    Do yourself a favor and run a ground wire to each light.

    nick
    Lakeville, MN
    Posts: 4977
    #903171

    FWIW there are a couple threads on here with wiring tips too, I personally ran outdoor extention cord for my wiring down the length of the trailer and connected the lights right there at the lights, making sure I had enough spare wire for the future if I wanted to clean up some connections, I figure the outdoor extention cord will be good forever in the rails, and I’ll not have to worry about shorts.

    I ran grounds at all lights, and at the hitch to the trailer. cleaned the trailer with a dremel and steel brush for a nice tight clean connection.

    Ralph Wiggum
    Maple Grove, MN
    Posts: 11764
    #903210

    Quote:


    FWIW there are a couple threads on here with wiring tips too, I personally ran outdoor extention cord for my wiring down the length of the trailer and connected the lights right there at the lights, making sure I had enough spare wire for the future if I wanted to clean up some connections, I figure the outdoor extention cord will be good forever in the rails, and I’ll not have to worry about shorts.

    I ran grounds at all lights, and at the hitch to the trailer. cleaned the trailer with a dremel and steel brush for a nice tight clean connection.


    I did the same after reading your previous posts. Why, though, did you bother connecting the ground to the trailer? A ground wire from each light connected to the white wire on the plug completes the circuit with no need to connect anything to the trailer frame.

    nick
    Lakeville, MN
    Posts: 4977
    #903319

    I’m talking about the white wire at the plug, I actually connected that to the trailer, most trailers I’ve had didn’t have them hooked up, because otherwise I was grounding through the hitch, and that was sometimes a bit inconsistant, I figured it out after I was all proud of my work, backed the truck up to the trailer, plugged it in and….. nothing… I didn’t actually put it on the hitch, so it wasn’t working at all, took me a good 10 minutes to figure out my problem.

    That’s nearing 6 years ago now, so don’t hold me to being perfectly accurate, but I do believe it was something like this.

    z-man
    Dousman, WI
    Posts: 1422
    #904179

    Haven’t gotten around to the upgrading yet, but lots of great tips here and on the wiring threads. Gonna be an expert after I get this little job done (I hope!).

    phigs
    Twin Cities, MN
    Posts: 1046
    #904553

    i love the LED lights that came on my shorelander!

    z-man
    Dousman, WI
    Posts: 1422
    #909235

    Well,been busy fishing, and the old trailer lights/wiring have not been acting up, so put the project on the back burner. I bought the wiring harness and have been looking at various LED trailer lights, including some at a Shorelander parts dealer, which are the exact same size as the lights on my trailer, but cost 40 bucks each. Now I’m trying to find the manufacturer of those particular lights for an exact fit, but so far, no luck. Anyone know who makes the lights for Shorelander?

Viewing 18 posts - 1 through 18 (of 18 total)

You must be logged in to reply to this topic.