Yamaha 115 prop

  • lonewolf
    La Crosse, WI
    Posts: 292
    #1238144

    Looking for some advice on New SS prop. I currently have a 13×19 aluminum prop turning over 6000 rpms at 41mph. 09 Yamaha 115 4 stroke on an 09 Alumacraft Navigator 175. I’m looking at maybe getting the Yamaha 13 1/4 X 18 performance SS prop. Would this be a good prop for this setup or has anyone tried any others? Thanks

    jdegeorge
    Posts: 29
    #896688

    I’m running the same setup except I have the domminator I have a 13 1/4 x19 5200 rpms 41mpr trimmed up

    lonewolf
    La Crosse, WI
    Posts: 292
    #896692

    13 1/4 X19 SS or ALuminum? What brand of prop?

    Tom P.
    Whitehall Wi.
    Posts: 3526
    #896724

    Going to a stainless in the same diameter and pitch usually will drop 200 RPM`s. The reason for the drop is stainless has less slip.

    I would check with propman he has a great try and exchange program. He set me up with a power Tech prop for my 182TS Crestliner and nailed it down first time. It is the best 3 blade prop I have run for grip and rough water.

    Maybe he will chime in.

    Tom P.
    Whitehall Wi.
    Posts: 3526
    #896725

    Quote:


    I’m running the same setup except I have the domminator I have a 13 1/4 x19 5200 rpms 41mpr trimmed up


    Ar you not running way below your rated RPM`s? I thought the 115 Yamaha four stroke was closer to 6000RPM`s.

    francisco4
    Holmen, WI
    Posts: 3607
    #896728

    Quote:


    Quote:


    I’m running the same setup except I have the domminator I have a 13 1/4 x19 5200 rpms 41mpr trimmed up


    Ar you not running way below your rated RPM`s? I thought the 115 Yamaha four stroke was closer to 6000RPM`s.


    ditto. You will be able to make it more efficient by getting it closer to 6000 rpms. Not to mention more speed in most conditions.

    FDR

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.