Who Does Prop Repair Around Rochester, Mn.?

  • bill_cadwell
    Rochester, Minnesota
    Posts: 12607
    February 10, 2004 at 1:19 pm #1232509

    Does anybody know of someone around Rochester, Mn. who does prop repair on regular props. The guy I use to go to in Wabasha doesn’t do it anymore I’ve been told. Thanks, Bill

    rvvrrat
    The Sand Prairie
    Posts: 1840
    February 10, 2004 at 6:07 pm #292220

    I have heard of a shop down in Rollingstone (east of Rochester) that does excellent work. Anybody have a name or phone # of this shop? I could use it too.

    James Holst
    Keymaster
    SE Minnesota
    Posts: 18926
    February 10, 2004 at 6:08 pm #292221

    Most all the shops in this area farm out their prop repair to Kesters. I believe he’s still located in Dodge Center… but it’s been soooo long since I’ve taken anything to him I could be mistake about that.

    Kerry Harvey
    Brownsdale, MN.
    Posts: 286
    February 10, 2004 at 8:18 pm #292238

    Kester’s is in Brownsdale. 507-567-2016.

    yellowdog
    Alma Wi
    Posts: 1303
    February 10, 2004 at 9:31 pm #292042

    The guy in Rollingstone is Power Tech or Prop Tech I forget which.Does props for the Corp. very good reputation.

    bill_cadwell
    Rochester, Minnesota
    Posts: 12607
    February 11, 2004 at 1:25 am #292278

    Hey Kerry, is that the same guy you took Nates prop to? Do you know what he charges for reg props? Thanks, Bill

    amwatson
    Holmen,WI
    Posts: 5130
    February 11, 2004 at 2:04 am #292281

    I will put in a good word for Power Tech in Rollingstone. I do remember he was very fair in his prices. He repaired one for me last year and I also bought a spare for a lot less than anyone else was selling for.His number is 507-689-2094

    bill_cadwell
    Rochester, Minnesota
    Posts: 12607
    February 11, 2004 at 2:16 am #292284

    Thanks for the response guys. Thanks, Bill

    rvvrrat
    The Sand Prairie
    Posts: 1840
    February 11, 2004 at 3:49 am #292296

    Thanks AM, that’s the info I needed. I have also heard the prices were reasonable and the quality of work high.

    Kerry Harvey
    Brownsdale, MN.
    Posts: 286
    February 11, 2004 at 3:54 am #292298

    Bill, I don’t know what his rates are, but I can stop by tomorrow and find out if you want me to. Yep that’s where Nate’s prop was fixed.

    nate-cadwell
    Rochester, Mn
    Posts: 498
    February 12, 2004 at 12:43 am #292436

    Hey Dad

    I would send your prop to Kesters in Brownsdale he did an excellent job on mine I would reccomend him to anyone.

    hes the one stop prop shop

    And dad if you are nice enough I even know of a guy from brownsdale that delivers those props to and from kesters

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.