How Long is Your Shaft?

  • jetdriver
    Hudson WI
    Posts: 491
    February 23, 2010 at 11:33 pm #1237781

    So how many inches difference is there between a short and long shaft tiller?

    jasonjabe
    La Crosse/St. Charles
    Posts: 63
    February 23, 2010 at 11:35 pm #845388

    Short is 15″…long is 20″. Hope this helps.

    perch_44
    One step ahead of the Warden.
    Posts: 1589
    February 24, 2010 at 12:06 am #845397

    you said shaft.

    targaman
    Inactive
    Wilton, WI
    Posts: 2759
    February 24, 2010 at 12:34 am #845401

    x2 on giggity

    sink-her
    Kasson MN
    Posts: 365
    February 24, 2010 at 12:41 am #845407

    Where is my wife when u need here

    millerman
    Red Wing, MN
    Posts: 627
    February 24, 2010 at 1:52 am #845439

    On the high end of the average thanks for asking!

    jerrj01
    Hudson, WI
    Posts: 1547
    February 24, 2010 at 2:17 am #845457

    And the following is 12 inches long:

    |——————————————————–|

    VSRangerMan
    Chippewa Falls,WI
    Posts: 554
    February 24, 2010 at 3:12 am #845491

    Answer to the main ? 5″

    Quote:

    And the following is 12 inches long:

    |——————————————————–|

    You must have a very large screen or have resized or zoomed in on it considerably.

    smackem
    Iowa Marshall Co
    Posts: 956
    February 24, 2010 at 2:40 pm #845616

    Given my choices of Long and Short, would have to go with long

    rmartin
    United States
    Posts: 1434
    February 24, 2010 at 2:48 pm #845623

    That is kind of a personal question isn’t it? But if you must know, long enough to get the job done.

    jetdriver
    Hudson WI
    Posts: 491
    February 24, 2010 at 9:17 pm #845807

    OK. So how do you measure it? (or with what?)

    smackem
    Iowa Marshall Co
    Posts: 956
    February 24, 2010 at 9:30 pm #845814

    Hope this helps

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.