On board charger, one bank going belly up

  • fishmark
    Ramsey, MN
    Posts: 45
    #1236601

    Have a Dual Pro Charger, 2 banks, 15 amps each. Has been in boat for 6 years. One bank works intermittently. Know I have to replace it, was thinking of purchasing a 3 bank so starting battery will also be charged.

    Here’s the problem. How do I remove the Dual Pro? I have a Lund 1775 ProV, the charger is mounted on the port side of the rod locker in it’s own little box area. I see six cross tip heads, I can turn one and nothing happens it just spins, can’t turn the other five. Don’t know if it’s a striped out screw or bolt with a nut. There doesn’t seem to be a way behind the charger without taking half the boat apart. Sure hope they didn’t bolt it in before the floor was installed, that would not be good! Is there a cover on the charger that comes off, giving me access behind it? Any help would be much appreciated. Thanks

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.