Help installing Lowrance 522c

  • deertracker
    Posts: 9163
    July 21, 2007 at 6:16 pm #1235536

    I’m installing a Lowrance-522c iGPS on our departments water patrol boat. I’m fine with most of the installation but get confused when dealing with the NMEA 2000 cable. There will be no other units in the boat. Can I cap it off, or do I still need to hook it up?

    IdaRatherFish
    Posts: 45
    July 21, 2007 at 8:14 pm #592606

    You can terminate loose ends but every connector must be either terminated or connected to equipment. Why do you have the NMEA network with only one unit? Do you plan to connect other devices – temp, fuel management, etc?

    t-ellis
    Colorado Springs, CO
    Posts: 1316
    July 21, 2007 at 8:24 pm #592608

    It doesn’t sound like you are going to be networking, if not just cap off the ends and you are set.

    nick
    Lakeville, MN
    Posts: 4977
    July 21, 2007 at 10:30 pm #592618

    Quote:

    It doesn’t sound like you are going to be networking, if not just cap off the ends and you are set.

    deertracker
    Posts: 9163
    July 21, 2007 at 10:48 pm #592621

    Thanks for the help. I will not be networking, so it looks like I’ll just cap them off and be set.

    drifter295
    Hastings MN
    Posts: 413
    July 22, 2007 at 1:21 am #592636

    just installed one of these on my bro in laws boat, just cap off the networking end, and your unit will work fine.

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.